Operator's Manual | Second Edition • First Printing |
|
|
|
|
SAFETY RULES
Optional Drive System Safety
Tip-over Hazards
Use extreme care and slow speeds while driving the machine in the stowed position across uneven terrain, debris, unstable or slippery surfaces and near holes and
Do not drive the machine on a slope that exceeds the maximum uphill, downhill or side slope rating of the machine. Slope rating applies to machines in the stowed position.
Maximum slope rating, stowed position
Toungue/hitch uphill | 20 % (11°) |
|
|
Toungue/hitch downhill | 20 % (11°) |
|
|
Side slope | 20 % (11°) |
Note: Slope rating is subject to ground conditions and adequate traction.
Collision Hazards
Do not drive the machine unless the parking brake is released on the tongue.
Do not drive the machine unless the platform is fully lowered.
Be aware of limited sight distance and blind spots when driving or operating.
Observe and use the
Limit travel speed according to the condition of the ground surface, congestion, slope, location of personnel, and any other factors which may cause collision.
Use common sense and planning when operating the drive system from the ground. Remove the drive control box from its mounting and step away from the machine before driving. Maintain safe distances between the operator, the machine and fixed objects.
Decal Legend
Genie product decals use symbols, color coding and signal words to identify the following:
Safety alert
presence of an imminently 
hazardous situation which, if not avoided, will result in death or serious injury.
hazardous situation which, if not avoided, could result in death or serious injury.
Yellow with safety alert symbol— 
used to indicate the presence of a 
potentially hazardous situation which, if not avoided, may cause minor or moderate injury.
Yellow without safety alert
6 | Genie | Part No. 114164 |