Invacare 1101100, 60106X144, 1098348, 1098318, 1098330, 1097049 owner manual Upholstery Procedure

UPHOLSTERY			PROCEDURE 4
INSTALLING/REMOVING SEAT		INSTALLING/REMOVING CHEST
POSITIONING STRAP (FIGURE 3)		POSITIONING STRAP (FIGURE 4)
1.	Remove seat cushion from wheelchair, if necessary.	1. Remove the two (2) mounting screws and washers
2.	Remove the REARMOST mounting screws that se-		securing the back upholstery to the back cane.
	cure the seat upholstery to the seat rail as shown in	2.	Do one (1) of the following:
	FIGURE 3.		A. To install the chest positioning strap, proceed to
3.	Grasp the rear edge of the seat upholstery and lift up		STEP 3.
	to expose the REARMOST mounting holes in seat		B. Remove the two (2) existing chest positioning
	rail.
			strap halves from the back upholstery.
4.	Do one (1) of the following:
		3.	Secure the two (2) halves of the NEW chest position-
	A. To install the seat positioning strap, proceed to		ing strap together.
	STEP 5.	4. Align the mounting hole on one (1) end of the NEW
	B. Remove the EXISTING seat positioning strap		chest positioning strap with the mounting hole on the
	from the wheelchair.		back upholstery and back cane.
5.	Secure the two (2) halves of the NEW seat position-	5. Secure the NEW chest positioning strap and back
	ing strap together.		upholstery to the back cane with one (1) mounting
6.	Position one (1) end of the NEW seat positioning strap		screw and washer. Torque to 20-25 in./lbs.
	between the seat upholstery and the seat rail.	NOTE: Ensure strap is oriented properly and not twisted
7.	Align the mounting holes on the seat upholstery, seat	when installing.
	rail, and one (1) end of the NEW seat positioning strap.	6. Repeat STEPS 4-5 for opposite side of NEW chest
8.	Secure the NEW seat positioning straps and seat		positioning strap.
	upholstery to the seat rail with the two (2) mounting		Secure These Ends Together	Chest
	screws. Torque to 25-30 in./lbs.
				Positioning
NOTE: Ensure strap is oriented properly and not twisted				Strap Half
when installing.			Chest
9.	Repeat STEPS 6-8 for opposite side of the seat posi-			Washer
		Positioning
	tioning strap.
		Strap Half
10.	Reinstall seat cushion onto wheelchair, if necessary.
	Rearmost			Back
			Upholstery
	Mounting
		Back
	Screws			Mounting
		Cane
Rear Edge of			Washer	Screws
	Seat	NOTE: Only Hook and Loop style chest positioning strap
Upholstery
		shown. Auto style chest positioning strap attaches the
		same way.

Seat Positioning FIGURE 4 - INSTALLING/REMOVING CHEST

Strap Half POSITIONING STRAP

	Seat Positioning
Seat Rail	Strap Half

NOTE: Only Hook and Loop style seat positioning strap shown. Auto style seat positioning strap attaches the same way.

FIGURE 3 - INSTALLING/REMOVING SEAT

POSITIONING STRAP

U P H O L S T E R Y

19