Bunn ITCB-DV manual Programming the Brewer Programming Functions Level 2, SET Language

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

The functions in the second level of programming allow the operator to adjust brew settings and other feature options.

To access the level 2 function screens press and hold the right hidden button. Release when the display reads:

SET LANGUAGE

This function allows the operator to select the language used for the display.

Procedure for setting Language:

1.Press and hold the right hidden button until the display reads SET LANGUAGE? and release.

2.Press YES to proceed. The display should now read ENGLISH. Using (-)and (+), scroll through the available languages until the desired language is shown on the display.

3.When finished, press DONE. If the language selected is different from the current settings,the display will read CHANGE LANGUAGE? ARE YOU SURE? and then will change to CHANGE LANGUAGE? To convert the display to the new language, press YES. To retain the current language, press NO.

4.The display should now read UNITS. To exit programming and return to the MAIN SCREEN, press and release the ON/OFF button.

SET LANGUAGE?

NO		YES
BREW	BREW	BREW
A	B	C

ENGLISH

(-) DONE (+)

BREW	BREW	BREW
A	B	C

ESPANOL

(-) SELECCIONE (+)

BREW	BREW	BREW
A	B	C

Scrolls through all available languages in memory

UNITS

METRIC DONE ENG

BREW	BREW	BREW
A	B	C

Page 18 36748 080904