Bunn ITCB-DV manual Enabl Sanitation, Procedure for enabling sanitation Range 0.0 to 72.0 hrs

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

ENABL SANITATION

This function allows the operator to enable the sanita- tion function and set the time before a cleaning alert will be displayed.

Procedure for enabling sanitation:

Range: 0.0 to 72.0 hrs.

1.	Press and hold the right hidden button until the dis-
	play reads SET LANGUAGE. Press the right hidden
	button until the display reads ENABL SANITATION.
	The YES or NO will be flashing to indicate the cur-
	rent selection.
2.	Press and release the NO button to disable this

			ENABL SANITATION
			NO			DONE YES
	WITH NO FLASHING			BREW		BREW	BREW		WITH YES FLASHING
	PRESS DONE			A		B	C		PRESS DONE
ENABL ENERGYSAVR							X.X HRS-> CLEAN
NO		DONE			YES		(-) DONE (+)
	BREW	BREW		BREW			BREW	BREW		BREW
	A	B			C		A		B	C

	function (no sanitation alert will be displayed on
	the screen), or:
3.	Press and release the YES button to enable this
	function (a sanitation alert will displayed on the
	screen).
4.	When finished, press and release DONE to save
	the new setting and advance to the next function
	screen.
5.	If NO was selected, the display should now read
	ENABLE ENERGYSAVR. To exit programming and
	return to the MAIN SCREEN, press and release the
	ON/OFF pad.
6.	If YES was selected, the display should now read
	X.X HRS -> CLEAN. This screen allows the opera-
	tor to set the amount of time from when a brew is
	completed until a sanitize alert will be displayed.
	Use (-)and (+) to adjust the set time. When finished,

CLEAN AND SANITIZE

MACHINE, WHEN FINISHED

PRESS FULL

X.X HRS UNTIL

NEXT CLEAN

WHEN TIME HAS

EXPIRED, THE

DISPLAY WILL READ:

PLEASE SANITIZE

PRESS FULL FOR 3 SEC TO CANCEL

SANITATION

COMPLETE

press and release DONE.

NOTE: The timer will not begin until after a brew cycle has been completed.

7.The display should now read X.X HRS UNTIL NEXT CLEAN, and then advance to the next programming function, ENABLE ENERGYSAVR.

8.Once the set time has expired, the display will read PLEASE SANITIZE, and then PRESS FULL FOR 3 SEC TO CANCEL.

9.Clean and sanitize the machine.

10.When finished, press and hold the FULL batch but- ton to reset the Sanitation timer. The display should now read SANITATION COMPLETE and then will return to the MAIN SCREEN.

P2873

Page 44 36748 070706