Bunn ITCB-DV manual SET Recipe Temps, Tools, Yes

PROGRAMMING THE BREWER (cont.)

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

SET RECIPE TEMPS

This function allows the operator to set separate tem- peratures for each selected recipe.

NOTE: Setting recipe temps will override the MASTER TEMP. The tank will hold at the lowest temperature between the three selected recipes stored in the brew buttons. For instance, let’s say Brew A’s recipe tem- perature is set at 205°, Brew B’s recipe temperature is set at 205°, and Brew C’s recipe temperature is set at 200°. The tank will hold at 200°. If Brew A or Brew B

the right hidden switch until the display reads SET LANGUAGE. Press and release the right hidden switch until the display reads SET RECIPE TEMPS. Press and release YES. The display will read WILL OVERRIDE THE MASTER TEMP, and then OVERRIDE? To return to using the MASTER TEMP, press and release NO.

SET RECIPE TEMPS

NO YES

PRESSING NO WILL	BREW	BREW	BREW
ADVANCE TO
	A	B	C
SERVICE TOOLS

is pressed, the tank will heat to the 205° temperature. The brew button must be pressed again in order for a brew to start. After the completion of that brew, the tank will return to the 200° holding temperature. It may take awhile for the tank to return to the lower temperature.

1.	Press and hold the right hidden button until the
	display reads SET LANGUAGE. Press the right
	hidden button until the display reads SET RECIPE
	TEMPS.
2.	To set different temperatures for different recipes,
	press and release YES. Pressing NO will advance
	to the next programming function, SERVICE
	TOOLS.
3.	The display should read WILL OVERRIDE THE
	MASTER TEMP, and then OVERRIDE? To retain the

PRESSING NO WILL RETAIN THE MASTER TEMP

WILL OVERRIDE THE MASTER TEMP

OVERRIDE?

NO YES

BREW	BREW	BREW
A	B	C

TEA 1		XXX°
(-)	DONE	(+)
BREW	BREW	BREW
A	B	C

	MASTER TEMP setting, press and release NO. To
	set separate recipe temperatures, press and release
	YES.
4.	The display should read TEA 1. Using (-)and (+),
	adjust the temperature for TEA 1. When finished,
	press and release DONE.
5.	The screen should now read TEA 2. Use (-)and (+)
	to adjust the temperature for TEA 2. When finished,
	press and release DONE.
6.	Repeat for all standard and stored recipes.
7.	After the last temperature has been entered, press
	DONE. The screen should now read TANK WILL
	HOLD AT LOWEST TEMP, and then advance to
	the ENTER ASSET # screen. To exit programming,

press and release the ON/OFF button to return to the MAIN SCREEN.

NOTE: To return to using the MASTER TEMP setting after RECIPE TEMPS have been used, press and hold

PRESSING DONE

WILL CONTINUE TO SCROLL THRU ALL STORED RECIPES

TEA 2		XXX°
(-)	DONE	(+)
BREW	BREW	BREW
A	B	C

COFFEE XXX° (-) DONE (+)

BREW	BREW	BREW
A	B	C

TANK WILL HOLD AT LOWEST TEMP

ENTER ASSET #

NO YES

Page 53 36748 030707