THE MEMORY FEATURE
Store up to ten
STORING A NUMBER IN MEMORY
1.Make sure the phone is OFF (not inTALK mode).
2.Press the memory button.
3.Press the desired memory location number (0 through 9).
4.Press the memory button again. The display shows ENTER NAME.
NOTE: If you don’t want to enter the name, skip step 5.
5.Use the keypad to store a name (up to 15 characters). For example, to enter the name Bill Smith, press the two key twice for the letter B, press the four key three times for the letter I, and press the five key three times for the letter L. After one second, press the five key three times again for the second letter L and press the one key to insert a space between the letter L and S. Press the seven key four times for the letter S, press the six key once for the letter M, press the four key three times for the letter I, press the eight key once for the letterT and press the four key twice for the letter H.
6.Press the memory button to save the name. The display shows
ENTER NUMBER.
7.Use the number keypad to enter the telephone number you want to store (up to 24 digits).
8.Press memory again to store the number.You will hear a confirmation tone.
CHANGING A STORED NUMBER
1.Repeat steps 1 through 7 in Storing a Name and Number in Memory.
2.Press the memory button. “REPLACE MEMO? “shows in the display.
3.Press *tone/cancel to exit, or press the memory button to store the number.You will hear a confirmation tone.
17