GE 26998 manual Dialing a Stored Number, Dialing Caller ID Numbers, Chain Dialing from Memory

DIALING A STORED NUMBER

1.Make sure the phone is ON by pressing theTALK/CALLBACK button.

2.Press memory.

3.Press the number (0-9) for the desired memory location. The number dials automatically.

DIALING CALLER ID NUMBERS

1.Make sure the phone is OFF.

2.Press memory.

3.Use the CID/VOL left (-) and right (+) arrow buttons to scroll through the numbers stored in memory until the desired number is shown.

4.Press TALK/CALLBACK. The number dials automatically.

IMPORTANT: If you make test calls to emergency numbers stored in memory, remain on the line and briefly explain the reason for the call to the dispatcher. Also, it’s a good idea to make these calls in off-peak hours, such as early morning or late evening.

CHAIN DIALING FROM MEMORY

Use this feature to make calls which require a sequence of numbers such as using a calling card for a frequently called long distance number. Basically, you dial each part of the sequence from memory.The following example shows how you can use chain dialing to make a call through a long distance service:

The Number For	Memory Location
Long distance access number	7
Authorization code	8
Frequently called long distance number	9

18