INSTALLING THE PHONE
Your cordless telephone/answering system should be placed on a level surface such as a desk or table top, or you can mount it on a wall.
TALK
1 2 3
4 5 6
7 8 9
* 0 #
1
2
CONNECTING THE AC (ELECTRICAL) POWER
Plug the power supply cord into the power jack on the bottom of the base and the other end into an electrical outlet.The in use/charge indicator turns on to indicate the battery is charging.
Allow the phone to charge for 12 hours prior to first use. If you don’t properly charge the phone, battery performance is compromised.
NOTE: DO NOT connect the telephone line to the modular jack until the phone has charged for 12 hours.
CAUTION: Use only the ATLINKS USA, Inc. power supply
CONNECTING THE TELEPHONE LINE
1.Plug the one end of the telephone line cord into the jack TEL LINE on the bottom of the base and the other end into a modular wall phone jack.
2.Set the RINGER switch (on the handset) to ON, and place the handset in the cradle.
7