Toshiba DKT2004-CT manual Connect Telephone Cords, Connect and Apply Power to Base Unit

Installation

Connect Telephone Cords

Step 2: Connect Telephone Cords

Your cordless digital telephone can be used as a stand-alone telephone or in conjunction with your deskset.

There are two telephone line jacks on the back of the base unit of your cordless digital telephone: “Line In” and “Line Out.” You can connect your cordless digital telephone to both the telephone line and a Strata DK digital telephone.

➤To use as a stand-alone telephone

➤ Connect the modular jack labeled “Line In” to the telephone wall jack.

➤	To use with a desk telephone	Wide	AC Adapter
		Blade

1. Unplug the telephone line cord from your desk telephone.

2.Connect this cord to “Line In” of your cordless telephone.

3.Using the two foot modular cord that

came with your cordless telephone,	1174
connect the jack labeled “Line Out” to
the desk telephone.

Step 3: Connect and Apply Power to Base Unit

Note The AC adapter furnished with this telephone may be equipped with a polarized line plug (a plug having one blade wider than the other). This plug fits into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact your facilities coordinator about replacing the obsolete plug. Do not alter the shape of the blades on the polarized plug.

8 Strata DKT2004-CT Cordless Digital Telephone 9/00