Toshiba DKT2004-CT manual To transfer a call using Camp-on

Features

Quick Reference

➤To transfer a call (using Camp-on)

1.	Press￿&QI￿7UQ.	The Line or [DN] LED flashes at the conference
		rate. You hear internal dial tone.
2. Dial the [DN] where the		The [DN] could be the [DN] of a telephone, a
	call is to be transferred.	Hunt Group Number, or ACD Group [DN], etc.
3.	Announce the call.	After dialing, you hear a single tone.
		Note If the call was made with Tone Signaling
		instead of Voice First Signaling, you hear
		ringing tone.
		If the called station does not answer, you receive
		a recall ring (when your station or [DN] is idle).
		The ring is set by system programming.
4.	Hang up	The Line LED changes to steady when the called
		station connects with the transferred call.
	...or press /LQH, [DN] +	The Line LED changes to steady red when the
	￿￿ to reconnect to the	called station connects with the transferred call.
	transferred line before the	After you hang up, the Line LED begins to flash
	call is answered or busy	at the on-hold rate or if you transferred the call
	tone is received.	from a [DN], the [DN] LED goes out. The CO
		Line or [DN] camps onto the called station and
		the called station receives a warning tone.
		You receive a recall ring when your station or
		[DN]￿is idle and camp-on is cancelled when the
		called station user fails to answer within a
		predetermined time. Repeat the procedure if
		necessary.

Strata DKT2004-CT Cordless Digital Telephone 9/00 35