Toshiba DKT2004-CT manual To set Call Forward-External

Page 63

Features

Call Forward

Call Forward-External

This feature enables you to forward new incoming calls directed to your [PDN] to a destination outside of the system. [PhDNs] assigned to your telephone do not Call Forward to external destinations. Internal calls and transferred calls to your [PDN] also do not forward to external destinations. Only incoming calls over CO Lines dedicated to your [PDN], private CO Line, and/or Direct In Dial line calls are forwarded. The Call Forward-External destination can be a telephone number over a CO Line, a station over a tie line, or a station within your Strata DK system.

Any of the Call Forward modes can be set for your [PDNs] or [PhDNs] simultaneously with Call Forward-External. This feature stores the calls to Station Speed Dial Code 49. Use the Speed Dial storage procedures detailed in this chapter. When forwarding to an outside destination include the CO Line (or CO Line Group) access code before the telephone number. See Table 1 on page 94 for the CO Line/ Line Group access codes. The LCR access code “9” cannot be used.

Important! Only perform the following procedure the first time Call Forward External is set or when you change the destination. It is not necessary to store the destination each time you set Call Forward External; it remains in system memory.

➤ To set Call Forward-External

1. Press &DOO)UZG	Incoming calls
([WHUQDO	forward to the	C F - E K T
	destination stored at	C F - E K T
	destination stored at
	Station Speed Dial
	Location 49		1201
	(RCTUA, B, C/D
	processors) or
	location 139 (RCTUE/F processors).
...or press the [PDN] +
+ 7$/..		C F - E K T
		C F - E K T
			1201

Strata DKT2004-CT Cordless Digital Telephone 9/00

51

Image 63

Contents DKT2004-CT Cordless Digital Telephone User Guide Publication Information Contents Configuration Iii Appendix Organization IntroductionHow to Use this Manual Conventions Viii Important Safety InstructionsIntroduction Related Documents Grand Tour Applications Benefits Cordless Digital Telephone Standard Parts Base Unit Controls and Functions Features Select Location InstallationConnect and Apply Power to Base Unit Connect Telephone CordsTo use as a stand-alone telephone Power Attach Belt Clip to Handset optional To attach the belt clip to the handsetTo remove the belt clip Removing and Charging Your Battery Pack on Install Handset Battery PackRemoving and Charging Your Battery Pack To remove the handset’s battery packTo charge the handset’s battery pack To charge extra battery packs Charging Extra Battery PacksTo avoid memory effect Tips on Extending Battery Pack LifeBattery Memory Effect LCD Low Battery IndicatorConfiguration3 To enter the program mode Entering Program ModeO G R a M Configuration Handset Controls Handset Volume LevelMute Ringer Volume LevelUsing the Handset To charge your handset Charging the HandsetTo transfer an active call Switching a Call to Your Cordless Digital TelephoneDesk LED lights steady Switching a Call to the Desk TelephoneTo store a number Using MemoryTo erase a stored number M O R Y #To dial a stored number Chain DialingWhen the bank requests your account number press 0HP LDO Features Before You Begin Quick Reference To change the signaling methodTo answer a call when you have Voice First signaling To answer a call when you have Tone First signalingTo direct dial an outside number To use CO Line Access Codes to dial an outside numberTo recall a busy station Making an Outside Call to an Isdn TrunkMaking an Internal Call To dial an internal callTo answer a call on Pooled Line Grp Answering CallsTransferring Calls To answer a call on a CO Line or DNTo transfer a call using Camp-on To add a station to a line call Conferencing CallsTo conference calls with stations only To add a second LinePlacing/Retrieving Calls on Hold To hold a call that appears on a Line or DN buttonTo place a Handsfree Answerback call on hold To retrieve a call on Exclusive Hold Using Automatic HoldTo retrieve the held call To place a call on Exclusive HoldCalling the Attendant Console To change to Tone Dialing Account Code CallsTone/Pulse Dialing Forced Account CodesTo use a Voluntary Account Code Emergency Override of Forced Account CodesVoluntary Account Codes To use a Forced Account CodeAlarm Reset Alert SignalingVerified Account Codes To send an Alert Signal Automatic Busy Redial ABRTo activate ABR To cancel ABR Automatic CallbackTo set Automatic Callback busy or DND stations To cancel Automatic Callback busy or DND stations Line Queuing with Automatic CallbackTo set Line Queuing To redial the last number dialed To cancel Line QueuingAuto Redial Call ForwardTo set Call Forward-All Calls Call Forward-All CallsCall Forward-Busy Call Forward-No AnswerTo set Call Forward-Busy To set call Forward-No Answer Call Forward-Busy/No AnswerTo set Call Forward-Busy/No Answer Call Forward-CancelTo set Call Forward-External Call Forward-ExternalTo cancel Call Forward-External Call Forward-FixedTo set Call Forward-Fixed Call Park To park a callTo pick up or retrieve a parked call Call Pickup Directed Call PickupTo use Directed Pickup Group Pickup To pick up a ringing CO Line in a tenant systemTo pick up a call ringing a station in your group To answer an incoming call while on another call Call WaitingCalls to Other Groups To pick up a call ringing another groupDo Not Disturb DND Direct Station Selection Buttons HotlineDoor Lock To activate/deactivate DNDTo unlock a door lock To answer a door telephone call Door TelephoneTo call/monitor a door telephone Isdn Outgoing CallingTo make an outgoing call with a subaddress to an Isdn trunk LCD Name/Number DisplaySubaddress To make an outgoing call to an Isdn trunkTo clear name/number display To activate name/number informationCalling Station Messaging Cancelling a Calling Station MessageTo cancel a message that has been set at your station MessagingTo cancel Message Waiting Message WaitingTo answer a Message Waiting To set a Message Waiting light on another telephone To respond to PhDN/MW To cancel Message Waiting set on a PhDN/MWPhDN/MW Message Waiting To set a Message Waiting indication for a PhDN/MWHandset Off-hook Call Announce HS-OCA Calling To make an HS-OCA call with Voice First SignalingOff-hook Call Announce OCA Activating Off-hook Announce OCATo make an HS-OCA call with Tone Signaling To make an SP-OCA call with Voice First Signaling To dial an SP-OCA call with Tone SignalingSpeaker Off-hook Call Announce SP-OCA Busy Override To initiate a Busy Override signalTo initiate a DND Override signal Override CallsTo initiate Executive Override AnnouncementsPrivacy On-Line Executive OverrideTo cancel Privacy Override To make all lines on your station privateTo override Privacy On-Line Privacy Release To activate Privacy ReleaseTo deactivate Privacy Release Release and Answer Speed DialTo release a call and answer another To store a Station Speed Dial Number Storing Station Speed Dial NumbersTo call with a Speed Dial button Stored Station or System Speed Dial CallingTo call with a Speed Dial access code Timed RemindersTo enter a Timed Reminder To cancel a Timed Reminder To override/change Toll Restriction Toll Restriction OverrideUsing a DN Button To connect two outside lines using a DN buttonTwo Tandem Line Connection To connect two outside lines using the Line button Using Line ButtonsTo supervise a tandem call and release it Appendix Installing Optional Headset Problem Suggestion TroubleshootingRange and Performance Radio Interference Nine Simultaneous Conversation ChannelsBase Unit SpecificationsAvailable Optional or Replacement Items Access Codes RQI7UQ + + /LQH + $/. + 6SHHGLDO or + ~ Appendix To access a line CO Line Access CodesFeature Access Codes To enter a paging group access codePaging Group Codes RCTUE/F Speed Dial Access CodesIndex Isdn SP-OCA

Related manuals

Manual 77 pages 33.41 Kb