Planar PS5580 user manual Specification, Regulatory Information, EN61000-3-2, EN61000-3-3

8. Specification

Model Name		PS5580
Back Light Unit Type		LED
Active Display Area (H X V)		1209.6 X 680.4mm
Aspect Ratio		16 : 9
Number of pixels		1920 (H) X 1080 (V)
Pixel Pitch		0.630 X 0.630 mm
Display Colors		1.07Billion
Luminance of White		400 cd / m2
Contrast ratio (Dark Room)		4,000 : 1
Bezel		7 / 6 / 6 / 6 (U/D/L/R) mm
Power Supply		AC100V ~ 240V (50/60Hz)
	Max	125W
Power
	Typical	120W
Consumption
	Stand-By	＜1.0W
Surface Treatment		Haze 0% / Hard coating 2H
Viewing Angle		H : 178˚, V : 178˚
Response Time (G to G)		8msec (TYP.)
Environmental	Temperature	5℃ ~ 35℃
condition	Humidity	35% ~ 75%
	Support Resolution	VGA, SVGA, XGA, SXGA, UXGA, WXGA,
		480p,576p,720p(50/60),1080i(50/60),1080p(50/60)
Input Signal
	HDCP	Compliant with High-bandwidth Digital Content Protection
		(HDCP) using DVI and HDMI 1.3a standards
	Frequency	H : 31.5 ~ 75kHz, V : 50 , 60 Hz
In/Output	Input	DP x 1,HDMI x 2, DVI x 1, PC x 1, RS-232C x 1, LAN x1, IR x 1
Terminal	Output	DVI-D x 1, RS-232C x 1
Lamp Life Tme		Min 35.000Hrs (Ta : 25±2℃)
Dimension (W X H X D)		1224.2 x 696.0 x 50.0mm
Weights		21Kg(±0.5Kg)

※Product design and specification can be changed for quality improvement without prior notice.

9. Regulatory Information

Manufacturer's Name:	Planar Systems, Inc.
Manufacturer's Address:	1195 NW Compton Drive
	Beaverton, OR 97006
	Declares that the products Model Numbers: PS5580

Conforms with the provisions of:

Council Directive 2004/108/EC on Electromagnetic Compatibility;

EN55022:2010 Radiated and Conducted Emissions from IT Equipment

EN55024:2010 Immunity of IT Equipment
Including:	EN61000-4-2	Electrostatic Discharge
	EN61000-4-3	Radiated Immunity
	EN61000-4-4	Electrical Fast Transients
	EN61000-4-5	Line Surge
	EN61000-4-6	RF Conducted Susceptibility
	EN61000-4-8	Magnetic Field Immunity
	EN61000-4-11	Voltage Dips and Interrupts
And:	EN61000-3-2	Harmonic Current Emissions
	EN61000-3-3	Voltage fluctuations and Flicker

Council Directive 2006/95/EC on Low Voltage Equipment Safety:

EN60950:2006+A11+A1+A12 Safety of IT Equipment

The Technical Construction File required by this Directive is maintained at the corporate headquarters of Planar Systems, Inc., 1195 NW Compton Drive, Beaverton, OR 97006.

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

Industry Canada (ICES-003): This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Any changes or modifications to the display not expressly approved by Planar could void the user's authority to operate this equipment.

Other Certifications

CISPR 22

- 72 - - 73 -