Mitel 5220 manual Tag Call, To delete all missed, answered, or outgoing call logs

Page 38

To delete all missed, answered, or outgoing call logs:

1.After selecting the type of logs you wish to delete, press the DeleteAll softkey.

2.Confirm that you do want to delete all items by pressing the Yes softkey.

To delete a particular call from the call log:

zWith the call log that you want to delete displayed, press the Delete softkey.

Tag Call

Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the tag, your system administrator or telephone company can identify the source of the call and provide this information to appropriate personnel or authorities.

CAUTION: Tagging a non-malicious call may result in fines or other penalties.

To tag a malicious call:

zPress the Tag Call feature key while the call is in progress. See "Feature Keys" elsewhere in this guide for information on programming a Tag Call feature key to your phone.

-OR-

zPress TRANS/CONF.

zDial *55.

If the call was successfully tagged "Thank You" is shown on the display; otherwise, "Not Allowed" is displayed.

Note: Tag Call can be used on active two-party calls only. Calls on hold and conference calls cannot be tagged.

-33-

Image 38

Contents User Guide 3300 ICP Contents Call Handling Using the Line Interface Module About Your Phone Page Telephone status indicators For Users on Resilient 3300 ICP SystemsDont cradle the handset Tips for Your Comfort and SafetyAdjusting the viewing angle Protect your hearingCustomizing Your Phone Handset Receiver Volume ControlSpeaker Volume Control Ringer ControlTo display information about a key Feature KeysLanguage Change To re-program a personal keyAnswer a call Making and Answering CallsMake a call Emergency Calls When Emergency Call Routing not Programmed Emergency CallsPhonebook To use PhonebookTo redial the last number that you manually dialed RedialRedial Saved Number To save the last number that you manually dialedTo store a Speed Call number Speed Call KeysTo dial a stored Speed Call number To store a personal Speed Call number Speed Call PersonalTo dial a stored personal Speed Call number Handsfree Operation Auto-Answer Group ListenTransfer Call HandlingHold Add Held ConferenceConference Split SwapTo turn Call Forward on and off once it has been programmed Call ForwardTo program Call Forward Call Forward Remote Call Forward End ChainingMessaging Advisory Call Forward ForcedCall Forward Override To check for messages from a remote station Messaging CallbackTo respond to a message waiting condition on your phone To cancel a Callback Messaging Cancel CallbackMessaging Cancel All Callbacks To cancel all CallbacksAttendant Call Hold Remote Retrieve Using Advanced FeaturesAccount Codes To retrieve a parked call Call ParkTo park an active call Do Not Disturb Call PickupCampon Paging To use Override when you encounter busy or DND toneOverride To use PagingDirect Paging To answer a page while using the handsetTo enable or disable Handsfree Answerback To page a partyReminder Headset OperationMusic Headset Operation with Feature Control SwitchTo turn Music on and off when the phone is idle To answer a callTrunk Flash To respond to a Group Page by using Meet Me AnswerGroup Paging / Meet Me Answer To make a GroupRecord a Call To log out of Hot Desking phone the phone must be idle Hot DeskingTo log into a Hot Desking phone the phone must be idle To remotely log out a Hot Desking phoneTo return a call Call HistoryTo display the call history, and view call detail To delete a particular call from the call log Tag CallTo delete all missed, answered, or outgoing call logs To tag a malicious callUsing the Line Interface Module To answer a Call using the analog line Making and Answering Calls Using the Analog keyTo make a call using the Analog line Making and Answering Calls Using the Failover Mode To end a current call when an incoming analog call arrives

Related manuals

Manual 31 pages 36.09 Kb