Mitel 5220 manual To use Phonebook

Page 14

To make an Emergency Call using the Line Interface Module line, when the IP connection has failed:

1.Lift the handset.

2.Press the Line Interface Module key that you have programmed. The set indicates IP FAIL: ANALOG CALL.

3.Dial your Local Emergency Number.

EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING PROGRAMMED

Note: This procedure is in addition to the methods described above.

To make an Emergency Call if Emergency Call Routing is programmed:

1.Lift the handset.

2.Dial your Local Emergency Number (911 or equivalent).

For more information on using the Line Interface Module line, refer to Using the Line Interface Module.

Phonebook

For each letter in the name, press the appropriate key on the keypad until the letter is shown in the display; for example, if the letter C is required,

press the digit 2 three times. Use the

softkey to correct errors. If the next

letter in a name is on the same key as the previous letter, press the

softkey before proceeding. If required, use the

softkey to add a space

between the first and last name.

 

 

To use Phonebook:

1.Press the Phonebook softkey.

2.Enter the name of the desired party.

3.Press the Lookup softkey.

4.If no match exists, edit the original entry.

5.If the name is not unique, press the Next softkey.

6.Do one of the following:

„To make the call, press the Call softkey.

„To edit the entry, press the Retry softkey.

„To exit, press SUPERKEY.

-9-

Image 14
Contents User Guide 3300 ICP Contents Call Handling Using the Line Interface Module About Your Phone Page Telephone status indicators For Users on Resilient 3300 ICP SystemsDont cradle the handset Tips for Your Comfort and SafetyAdjusting the viewing angle Protect your hearingCustomizing Your Phone Handset Receiver Volume ControlSpeaker Volume Control Ringer ControlTo display information about a key Feature KeysLanguage Change To re-program a personal keyAnswer a call Making and Answering CallsMake a call Emergency Calls When Emergency Call Routing not Programmed Emergency CallsPhonebook To use PhonebookTo redial the last number that you manually dialed RedialRedial Saved Number To save the last number that you manually dialedTo store a Speed Call number Speed Call KeysTo dial a stored Speed Call number To store a personal Speed Call number Speed Call PersonalTo dial a stored personal Speed Call number Handsfree Operation Auto-Answer Group ListenTransfer Call HandlingHold Add Held ConferenceConference Split SwapTo turn Call Forward on and off once it has been programmed Call ForwardTo program Call Forward Call Forward Remote Call Forward End ChainingMessaging Advisory Call Forward ForcedCall Forward Override To check for messages from a remote station Messaging CallbackTo respond to a message waiting condition on your phone To cancel a Callback Messaging Cancel CallbackMessaging Cancel All Callbacks To cancel all CallbacksAttendant Call Hold Remote Retrieve Using Advanced FeaturesAccount Codes To retrieve a parked call Call ParkTo park an active call Do Not Disturb Call PickupCampon Paging To use Override when you encounter busy or DND toneOverride To use PagingDirect Paging To answer a page while using the handsetTo enable or disable Handsfree Answerback To page a partyReminder Headset OperationMusic Headset Operation with Feature Control SwitchTo turn Music on and off when the phone is idle To answer a callTrunk Flash To respond to a Group Page by using Meet Me AnswerGroup Paging / Meet Me Answer To make a GroupRecord a Call To log out of Hot Desking phone the phone must be idle Hot DeskingTo log into a Hot Desking phone the phone must be idle To remotely log out a Hot Desking phoneTo return a call Call HistoryTo display the call history, and view call detail To delete a particular call from the call log Tag CallTo delete all missed, answered, or outgoing call logs To tag a malicious callUsing the Line Interface Module To answer a Call using the analog line Making and Answering Calls Using the Analog keyTo make a call using the Analog line Making and Answering Calls Using the Failover Mode To end a current call when an incoming analog call arrives
Related manuals
Manual 31 pages 36.09 Kb