The key sequence of the PARK : LLP__________PC
LL : Two digits decimal representation of PARK length (Bit count)
P______P : 11 octal digits representation of PARK
C: Check digit (It is calculated as the sum of each digit in the input stream multiplied by its Position in the input stream, modulo 11; if the result if 10, this is represented by the “*”.)
The key sequence of the AC code : D_____D
D_____D : AC value :
FTID : 1 ~ 4
3)At the
Up to 8 digits decimal representation.
5 1 + select Base No + [OK] +
AC code +
[OK] +
Display SEARCHING + Display PARK(last 12Digit) + | [OK] |
①Press MENU (UP or DOWN) button.
② Press 
.
③ Press 
.
④Select base number (1~4) using UP or DOWN button and press OK button.
⑤ Enter AC code (up to 8 digits decimal representation) and press OK button
⑥ The wireless terminal tries to search for the registerable system and ‘SEARCHING’ is displayedon the LCD. After searching the registerable system, PARK(last 12digits) value is displayed on the LCD.
⑦ If the PARK value displayed is right, press OK button. If the PARK value displayed isn’t right press UP or DOWN button. And then the wireless terminal retries to search for the registerable system and ‘SEARCHING’ is displayed again.
⑧ Success or failure of the subscription is notified with confirmation tone to the attendant and the wireless terminal.
⑨ If succeeded in subscription, the wireless terminal goes to an idle state and its station number is displayed.
⑩ If failed, repeat 3) ~ 6) steps of the attendant and 1) ~ 7) steps of wireless terminal.
Condition
1)Wireless terminal must be subscribed to system for normal service.
2)Only attendant can subscribe the wireless terminals(GAP).
3)Attendant can subscribe another wireless terminal after one subscribing procedure.
4)If attendant want to subscribe wireless terminal that was subscribed already, it will be heard error tone.
63