LG Electronics GDK-20W, LKD-8DS installation manual At the GDC-340H Menuup or Down

GDK-20W DIGITAL WIRELESS KEY TELEPHONE SYSTEM

[Trans/Pgm]

+ ## + Flex. Button 8 + Station Number

+[Hold/Save]

①Press the [Trans/Pgm] button, [Trans/Pgm] LED will flash(60 IPM Flash) and [On/Off] LED will be turned on.. Then you can enter then user program mode.

②Press ## .

③Press flexible 8

④Dial station number that you want to de-subscribe.

⑤Press [Hold/Save], you will be heard confirmation tone.

Condition

1)Wireless terminal must be de-subscribed to system for normal service.

2)Only attendant can de-subscribe the wireless terminals.

3)Attendant can de-subscribe another wireless terminal after one subscribing procedure.

4)If attendant want to de-subscribe wireless terminal that was subscribed already, it will be heard error tone.

2)At the GDC-335H

[Function] + 9 + 0000 + [Function] + Select Park number + [Function]

①Press [Function()] button

② Press 9

③ Enter User PIN number “0000”

④ Press [Function()] button

⑤ Select PARK number with UP(), DOWN() key.

⑥ Press [Function()] button

⑦ If the below LCD message is displayed. Power-off the wireless terminal

DESUBSCR I B

PRESSP WR

3) At the GDC-340H

[MENU(UP or DOWN)] + 5 + 2 + PIN Code + [OK] + or (To select FP#) +

[OK]

①Press MENU(UP or DOWN) button.

②	Press	. (Or set ‘>’ mark to ‘5 System’ by pressing UP(	) button or DOWN(	) button and
	press OK button).
③	Press	. (Or set ‘>’ mark to ‘5 UnRegister’ by pressing UP(	) button or DOWN(	) button and
	press OK button).

④Enter PIN code(0,0,0,0) If a user has changed PIN code before, the changed one should be

entered.

⑤Press OK button.

⑥If necessary, press UP() button or DOWN() button to select FT number which is desubscribed. If the desubscribed FT number is displayed on the second line of LCD, stop pressing UP() button

or DOWN() button.

⑦Press OK button.

*Note

①GDC-340H tries to synchronize to next registered system.

②If there isn’t next registered system, handset displays “UNREGISTERED” on LCD.

65