D. User Desubscription
Description
This procedure makes a wireless terminal loose access right to the
Operation
1) Attendant station
[Trans/Pgm] + ## + Flex. Button 2 + Station Number
+ [Hold/Save]
①If you press the [Trans/Pgm] button, [Trans/Pgm] LED will flash(60 IPM Flash) and [On/Off] LED will be turned on.. Then you can enter then user program mode.
②Dial ‘##’’
③Press Flexible Button 2
④ Enter the station number.
⑤ Press [Hold/Save] button and confirmation tone is heard.
⑥ Success or failure of the subscription is notified with confirmation tone to the attendant and the wireless terminal.
⑦ If succeeded in
D
E
S
U
B
S
C
R
I 
B
P
R
E
S
S
P W
R
⑧In case of the
to next registered system. If there isn’t next registered system,
Condition
1)Only attendant can
2)Attendant can
3)Attendant can
4)Attendant can do
*Notes : If you want to do
1) At attendant station
To erase all data those were subscribed.
[Trans/Pgm] + ## + Flex. Button 7 + Password(147*)
+[Hold/Save]
①Press the [Trans/Pgm] button, [Trans/Pgm] LED will flash(60 IPM Flash) and [On/Off] LED will be turned on.. Then you can enter then user program mode.
②Press ##
③Press flexible button 7
④ Enter password.
⑤ Press [Hold/Save], you will be heard confirmation tone. To erase a special wireless terminal
64