Kyocera Koi Tracking calls, Timing your calls, Receiving data or faxes, Understanding roaming

You can call the code even if your phone is locked or your account is restricted. When you call, your phone enters Emergency mode. This enables the emergency service exclusive access to your phone to call you back, if necessary. To make or receive regular calls after dialing the code, you must exit this mode.

To exit Emergency mode

When you have completed the emergency call:

1.Press to select Exit.

2.Press again to confirm your choice.

Note: To determine who has access to your location, see “Setting position location” on page 50.

Tracking calls

You can track the number and duration of calls made and received on your phone.

1.Select Menu → Call History.

2.Select a timer:

–Call History Timer—Tracks all calls you have made and received since you last reset this timer. To reset this timer to zero, press to select Reset.

–All Calls Timer—Tracks all calls you have made and received. This timer cannot be reset.

–Kilobyte Counter—Tracks the kilobytes of data sent and received by the phone. This counter resets automatically. May not appear on all phones.

Timing your calls

You can set your phone to beep 10 seconds before each minute passes when you are on a call.

•Select Menu → Settings → Sounds → Minute Alert → Enabled.

Receiving data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. For more information, see page 49.

Understanding roaming

Controlling network roaming

Depending on services available from your service provider, you may set the phone to either digital or analog mode. This is useful if you are in an area that borders on digital service and the automatic feature is causing the phone to keep switching between modes.

1.Select Menu → Settings → Network → Digital/Analog.

2.Select an option and press .

–Automatic automatically switches the phone between digital and analog.

–Analog only sets the phone to work in analog mode only.

–Analog call forces a call into analog mode for the duration of the next call.

–Digital only sets the phone to work in digital mode only.

14 Making and Answering Calls