Kyocera Koi manual Calling using digit dialing, Erasing voice tags, Waking up the phone

5.When you are finished with the call,

press if the swivel is open, or in if the swivel is closed. You cannot end the call with a voice command.

Erasing voice tags

To erase all voice name dial recordings in your phone:

1.Menu → Settings → Voice Features → Delete Voice Dial.

2.Select Yes.

Calling using digit dialing

When using digit dialing, you speak digits to dial a phone number.

Note: You cannot speak a string of digits. You must speak one digit at a time and wait for the prompt.

1.From the home screen, press . The phone responds: “Say a name or say Dial.”

2.Say “Dial”. The phone responds: “Speak a digit.”

3.Speak the first digit of the phone number you want to call. Once the phone repeats the digit, you can speak the next digit.

If you pause, the phone will prompt you with the following five options. After the prompt, speak an option.

–Say “Clear” to erase the digit last entered. The phone responds: “Digit cleared.” To clear the entire phone number, say “Clear” again. When the phone prompts you with “Clear entire phone number?”, say “Yes” to clear or “No” to cancel.

–Say “Call” to dial the number.

–Say “Verify” to cause phone to repeat the set of digits that you input.

–Say “Cancel” to exit voice recognizer and return to the home screen.

–Speak a digit to enter the next digit. Once the phone repeats the digit, you can speak the next digit or pause to hear the prompt.

Using voice features with hands-free car kits

You can use voice commands to make a phone call or to answer the phone only if your phone is connected to a professionally installed Kyocera hands-free car kit (sold separately).

Note: The following features apply only to installed hands-free car kits unless noted.

To shop for hands-free car kits, visit www.kyocera-wireless.com/store or call

800 349-4188 (U.S.A. only) or 858 882-1410.

Waking up the phone

If your phone is connected to a Kyocera installed hands-free car kit, you can use the voice command to activate the phone to make a phone call.

Note: Voice Wake-up does not work with Keyguard active.

To activate the Voice Wake-up setting:

1.Select Menu → Settings → Voice Features → Voice Wake-Up → With ext. pwr.

52 Using Voice Recognition