Installing Your Phone | 2 |
| |
(Optional) Attaching the Desk Stand |
|
|
|
|
|
Number Component
1Auxiliary port. Only for use with the Cisco SPA 500S attendant console.
2Power port. Insert the power adapter plug into this port.
3Additional Ethernet port. Connect an Ethernet cable to this port to provide network connectivity to a PC. (This port cannot be used when the phone is connected to the network via the
4Switch (Ethernet) port. Connect the network cable to this port.
5Phone cord slot. Insert one end of the phone cord into this slot and the other into the jack at the bottom of the phone handset.
6
USB port. For use with an external USB memory device (optional).
(Optional) Attaching the Desk Stand
NOTE: Do not attach the desk stand if you want to mount the phone to the wall. If you are attaching a Cisco SPA 500S attendant console attach the console before attaching the desk stand.
STEP 1 Line up the tabs on the desk stand with the slots on the back of the phone.
STEP 2 Slide the bottom tabs into the slots
STEP 3 Lightly press down on the top of the desk stand. It should easily slide into the top slots. Do not force.
Cisco Small Business Pro IP Phone SPA 525G (SIP) User Guide | 23 |