Vertical Communications GCA70-313 manual Positioning Your Station

Page 10

Pedestal Base

Adjusting The Pedestal

Getting Started

GCA70-313

Positioning Your Station

You should adjust the position of the station on your desk or table to suit your indi- vidual needs and, if applicable, maximize the performance of the sound activated features. When using a speakerphone, the microphone and loudspeaker are farther from you than when you use a handset. Some positioning tips for speakerphones to consider include:

For the microphone to best detect your voice, speak within three feet of it and face the station.

Background noise may prevent the sound-activated switches from operating properly. Avoid placing the speakerphone where it will detect sounds from typewriters, keyboards, printers, paging systems, and other equipment.

Place the speakerphone on a hard surface and away from table edges. Do not place the telephone in corners or enclosures. Do not let obstructions come between you and the microphone.

If you are using an Impact SCS model, your telephone has an adjustable pedestal to allow you to select the most comfortable viewing angle. When you receive the telephone, the pedestal is in its lowest

position—flush against the pedestal.

Telephone

To adjust the pedestal (Models

8212S and 8212N only),	First Notch
8212S and 8212N only),	Second Notch
1. GRASP the rear of the pedestal baseSupporting Arm	Third Notch
1. GRASP the rear of the pedestal baseSupporting Arm	(For Highest Position)
firmly with one hand AND LIFT the
rear portion of the telephone upward
with your other hand.	PED01

2. LIFT the telephone upward with o n e h a n d A N D R A I S E t h e

telephone supporting arms upward with your other hand. (Notice there are three sets of notches under the

telephone corresponding to the three positions available.)

3.When the telephone is at the desired height, SELECT the closest pair of notches AND INSERT the supporting arms in the notches. PRESS DOWN slightly on the telephone UNTIL you feel the supporting arms snap into place.

Also remember, as with any piece of electronic equipment, your telephone may be damaged by contact with liquids. So please try to place the telephone in an area that is free from the danger of spills.

2	Non-LCD Station User’s Guide

Image 10

Contents Page This User’s Guide is for the following system DXP, DXP Plus, FXS and FXT Digital Communication SystemsAbout This Book IntroductionSystem-to-System Network Contents Nonverbal Messaging Feature Access Codes Contents GCA70-313 Non-LCD Station User’s Guide Setting Up Your Station WelcomeTo adjust the pedestal Models 8212S and 8212N only Positioning Your StationTo select one of the ring tones, proceed as follows Setting a Personal Ringing ToneSetting Volume Levels To set the ringer loudness levelAnswering and Making Calls When you hear outside ringing two long burstsWhen you hear intercom ringing two short bursts To set the speaker and handset loudness levelsTo dial an outside number manually To dial an intercom number manuallyMicrophone Opening not available on 8112N and 8212N Understanding the Basic FunctionsMessage-Waiting Light Speaker not available on 8112N and 8212NImpact 8112N-** Telephone Your Station’s Buttons Tap Button TAP Transfer/Conference Button TRNS/CONFNext to a line button Next to a fixed feature or programmable feature buttonYour Station’s Display Lights Above the Mute buttonNext to the Message button SCS Series Models only Next to Intercom buttonAbove the Hold button Above the Speaker buttonSupported Telephone Models Models ExceptionsAnswering Outside Calls When you hear an intercom tone followed by a caller’s voice Answering Intercom CallsWhen you hear loud ringing anywhere in the system Night-Transferred Calls -Line Access From Any StationIf your telephone rings Exclusive Hold Holding CallsHandling Hold Recalls To place a call on directed station hold Directed HoldIf a held line is recalling, choose one of the following To retrieve a held call at another stationDirected Call Pickup Call PickupGroup Call Pickup Pickup For Monitored StationsTo monitor another telephone Handling an Incoming Sohva Receiving Subdued Off-Hook Voice Announcements SohvaTo respond to a Sohva verbally not available on 8112N To block all voice-announced calls Voice Announce BlockingTo unblock all voice-announced calls Do Not Disturb Condition To enable DND, choose one of the followingTo disable DND To override a do not disturb condition at another telephoneTo dial an outside number using your prime line Making Outside CallsTo tone call automatically Making Intercom CallsTo manually cause the other telephone to ring tone calling To voice announce manuallyAutomatic Dialing Redial Programming Storing Numbers RedialingRedial Last-Dialed Number To redial the last-dialed numberTo store a number while you are on a call To dial the saved numberTo later redial the saved number To send a paging announcement PagingTo reply to a Meet-Me To camp on at any busy station When you hear five short tone burstsCamping On Busy Station Automatic Callback To camp on at a station with a Do Not Disturb condition setCamping On Idle Station, Automatic Callback Advanced Camping On OptionsCamping On Busy Station, Wait For An Answer Call Waiting Camping On Options Make a Sohva announcement using the Sohva button as follows Sending Subdued Off-Hook Voice Announcements SohvaWaiting For a Line Queuing To cancel line queuing or line group queuingTo queue for a line group Conferencing Managing a Conference Call Forwarding a Call To cancel call forwardingCall Forwarding Diverting All Incoming Calls To Another StationTo identify the station to receive diverted calls To divert calls to the designated stationTo activate Cfos with your LCD station To join an active Cfos call from the CFOS-enabled stationCall Forward Outside System Cfos To deactivate CFOS, choose one of the followingTo enter account code on an incoming call Account CodesTo enter account code on an outgoing call Parking a Call Call ParkingHandling Park Recalls To place a park recall on hold at your station To re-park a park recall and restart the park timerANSWER/RETRIEVE call Screened Call Transfers Call TransferringIf the intercom party is busy or does not answer Unscreened Call Transfers To transfer an unscreened call to another system telephoneQuick Transfer Other Call Transferring OptionsHot Transfer To make a hot transfer to another telephone in the systemTo do a quick unscreened transfer Call Transferring SummaryPage To turn on a message from your telephone LCD Message DeliveryTo turn off the message and your intercom light LCD Message List Write the attendant supplied messages here Message Waiting Light and Messaging To receive a message at an alerted stationResponse Message Delivery Nonverbal Messaging GCA70-313 Non-LCD Station User’s Guide DSS Numbers To store an intercom number as a DSS numberSpeed Dial Numbers KeypadPress Speaker to end Personal Speed Dial Numbers Response Message Button Feature Buttons Camp-On With Automatic Call Back -allows you to camp on toTo manually store an access code Programming GCA70-313 Non-LCD Station User’s Guide If your system has line groups, access them as follows Line GroupsAutomatic Redial 8124S, 8112S and 8212S only GCA70-313 Other Advanced Features To track a called party after receiving a ring-no answer Tracker Paging SystemTo track a called party without first calling them If you receive a parked call message on your Tracker pager To retrieve a call that you parked using the Tracker optionTo enable or disable a Tracker pager at your station Answer call and Press TRNS/CONFVolume Control Setting Current Volume LevelTo mute your station Muting Your Station not available on 8112NTo speak to the distant party Default Volume Control Dial or Press programmedTo turn the music on Background Music Not available on 8112N or 8212NTo turn the music off Automatic Set Relocation DSS/BLF Console Operation Accessing The DSS/BLF Console Button Levels Feature Access Codes Feature Access Codes GCA70-313 Intercom + to Intercom + + tone Feature Enable Code Feature Access Codes GCA70-313 Non-LCD Station User’s Guide Assist Button Account CodeAll-Call Paging AttendantButton Query Class Of Service COS ProgrammingBlock Programming Call ForwardDepartmental Station Operation Direct Inward System Access DisaData Interface Unit DIU Dial By NameExclusive Hold HookswitchTie Lines Handsfree Answer InhibitLine Queuing Last Number RedialingLine Groups Meet-Me AnswerPrime Line Pulse/Tone SwitchingPaging PrivacyScreened Call Transfer Service ObservingSystem Alarm Reporting Speed DialingUnsupervised Conference Tracker PagerUnscreened Call Transfer Voice callSpeakerphone Characteristics Speakerphone User GuidelinesSpeakerphone Characteristics GCA70-313 Feature Networking Support Feature Networking Support GCA70-313 GCA70-313 Feature Networking Support Feature Networking Support GCA70-313 SLPS-TAP VVP Index GCA70-313 TRNS/CNF GCA70-313 Non-LCD Station User’s Guide CCB 15B