Vertical Communications GCA70-313 Setting a Personal Ringing Tone, Setting Volume Levels, Dial

Page 11

GCA70-313

Getting Started

Setting a Personal Ringing Tone

You can choose one of eight different ring tones for your telephone. Often, when several telephones are located close together, each user chooses a different personal ring tone.

To select one of the ring tones, proceed as follows:

1.PRESS INTERCOM.

2.DIAL .

3.DIAL number ( to ) to select ring tone.

4.The next time your telephone rings, you will hear the new ring tone.

Setting Volume Levels

The volume control on your telephone is a multi- purpose control you use to set the volume (loud- ness) of the ringer, the speaker, and the handset.

To set the ringer loudness level,

1. While your telephone is on-hook and
idle, PRESS the VOLUME UP OR
VOLUME DOWN button once for each
change in loudness you desire. The
ringer sounds once for each change as	Impact SCS Volume Buttons
an example of the current setting.

NOTE: If you set the ringer to the “off” position, your telephone will sound a short ring burst once for each call you receive at your station.

NOTE: On the 8112N, the ringer volume is controlled by a three-position switch on the bottom of the telephone. There is no handset volume control.

Non-LCD Station User’s Guide

3

Image 11

Contents Page DXP, DXP Plus, FXS and FXT Digital Communication Systems This User’s Guide is for the following systemIntroduction About This BookSystem-to-System Network Contents Nonverbal Messaging Feature Access Codes Contents GCA70-313 Non-LCD Station User’s Guide Welcome Setting Up Your StationPositioning Your Station To adjust the pedestal Models 8212S and 8212N onlyTo set the ringer loudness level Setting a Personal Ringing ToneSetting Volume Levels To select one of the ring tones, proceed as followsTo set the speaker and handset loudness levels When you hear outside ringing two long burstsWhen you hear intercom ringing two short bursts Answering and Making CallsTo dial an intercom number manually To dial an outside number manuallySpeaker not available on 8112N and 8212N Understanding the Basic FunctionsMessage-Waiting Light Microphone Opening not available on 8112N and 8212NImpact 8112N-** Telephone Your Station’s Buttons Transfer/Conference Button TRNS/CONF Tap Button TAPAbove the Mute button Next to a fixed feature or programmable feature buttonYour Station’s Display Lights Next to a line buttonAbove the Speaker button Next to Intercom buttonAbove the Hold button Next to the Message button SCS Series Models onlyModels Exceptions Supported Telephone ModelsAnswering Outside Calls Answering Intercom Calls When you hear an intercom tone followed by a caller’s voiceIf your telephone rings Night-Transferred Calls -Line Access From Any StationWhen you hear loud ringing anywhere in the system Handling Hold Recalls Holding CallsExclusive Hold To retrieve a held call at another station Directed HoldIf a held line is recalling, choose one of the following To place a call on directed station holdPickup For Monitored Stations Call PickupGroup Call Pickup Directed Call PickupTo monitor another telephone To respond to a Sohva verbally not available on 8112N Receiving Subdued Off-Hook Voice Announcements SohvaHandling an Incoming Sohva To unblock all voice-announced calls Voice Announce BlockingTo block all voice-announced calls To override a do not disturb condition at another telephone To enable DND, choose one of the followingTo disable DND Do Not Disturb ConditionMaking Outside Calls To dial an outside number using your prime lineTo voice announce manually Making Intercom CallsTo manually cause the other telephone to ring tone calling To tone call automaticallyAutomatic Dialing To redial the last-dialed number RedialingRedial Last-Dialed Number Redial Programming Storing NumbersTo later redial the saved number To dial the saved numberTo store a number while you are on a call To reply to a Meet-Me PagingTo send a paging announcement To camp on at a station with a Do Not Disturb condition set When you hear five short tone burstsCamping On Busy Station Automatic Callback To camp on at any busy stationCamping On Busy Station, Wait For An Answer Call Waiting Advanced Camping On OptionsCamping On Idle Station, Automatic Callback Camping On Options Sending Subdued Off-Hook Voice Announcements Sohva Make a Sohva announcement using the Sohva button as followsTo queue for a line group To cancel line queuing or line group queuingWaiting For a Line Queuing Conferencing Managing a Conference Call Diverting All Incoming Calls To Another Station To cancel call forwardingCall Forwarding Forwarding a CallTo divert calls to the designated station To identify the station to receive diverted callsTo deactivate CFOS, choose one of the following To join an active Cfos call from the CFOS-enabled stationCall Forward Outside System Cfos To activate Cfos with your LCD stationTo enter account code on an outgoing call Account CodesTo enter account code on an incoming call Handling Park Recalls Call ParkingParking a Call ANSWER/RETRIEVE call To re-park a park recall and restart the park timerTo place a park recall on hold at your station If the intercom party is busy or does not answer Call TransferringScreened Call Transfers To transfer an unscreened call to another system telephone Unscreened Call TransfersTo make a hot transfer to another telephone in the system Other Call Transferring OptionsHot Transfer Quick TransferCall Transferring Summary To do a quick unscreened transferPage To turn off the message and your intercom light LCD Message DeliveryTo turn on a message from your telephone LCD Message List Write the attendant supplied messages here To receive a message at an alerted station Message Waiting Light and MessagingResponse Message Delivery Nonverbal Messaging GCA70-313 Non-LCD Station User’s Guide To store an intercom number as a DSS number DSS NumbersKeypad Speed Dial NumbersPress Speaker to end Personal Speed Dial Numbers Response Message Button Camp-On With Automatic Call Back -allows you to camp on to Feature ButtonsTo manually store an access code Programming GCA70-313 Non-LCD Station User’s Guide Line Groups If your system has line groups, access them as followsAutomatic Redial 8124S, 8112S and 8212S only GCA70-313 Other Advanced Features To track a called party without first calling them Tracker Paging SystemTo track a called party after receiving a ring-no answer Answer call and Press TRNS/CONF To retrieve a call that you parked using the Tracker optionTo enable or disable a Tracker pager at your station If you receive a parked call message on your Tracker pagerSetting Current Volume Level Volume ControlTo speak to the distant party Muting Your Station not available on 8112NTo mute your station Dial or Press programmed Default Volume ControlTo turn the music off Background Music Not available on 8112N or 8212NTo turn the music on Automatic Set Relocation DSS/BLF Console Operation Accessing The DSS/BLF Console Button Levels Feature Access Codes Feature Access Codes GCA70-313 Intercom + to Intercom + + tone Feature Enable Code Feature Access Codes GCA70-313 Non-LCD Station User’s Guide Attendant Account CodeAll-Call Paging Assist ButtonCall Forward Class Of Service COS ProgrammingBlock Programming Button QueryDial By Name Direct Inward System Access DisaData Interface Unit DIU Departmental Station OperationHandsfree Answer Inhibit HookswitchTie Lines Exclusive HoldMeet-Me Answer Last Number RedialingLine Groups Line QueuingPrivacy Pulse/Tone SwitchingPaging Prime LineSpeed Dialing Service ObservingSystem Alarm Reporting Screened Call TransferVoice call Tracker PagerUnscreened Call Transfer Unsupervised ConferenceSpeakerphone User Guidelines Speakerphone CharacteristicsSpeakerphone Characteristics GCA70-313 Feature Networking Support Feature Networking Support GCA70-313 GCA70-313 Feature Networking Support Feature Networking Support GCA70-313 SLPS-TAP VVP Index GCA70-313 TRNS/CNF GCA70-313 Non-LCD Station User’s Guide CCB 15B