RCA IP120 manual Advanced Network Settings, To configure Vlan settings via Phone interface

Page 35

These parameters can only be configured via the web interface:

1)Go to ACCOUNT [ ACCOUNT SETTINGS.

2)Select desired account.

3)Set any desired parameters in the Advanced section.

Check with the network administrator or service provider for more information.

Network Settings

Please refer to the “Configuration and Registration” section for the Basic Network WAN setting information. The next paragraphs will describe other Network related settings.

Advanced Network Settings

VLAN

VLAN is a group of hosts with a common set of requirements that communicate as if they were attached to the Broadcast domain, regardless of their physical location.

The IP120 supports 802.1p and q packet tagging. VLAN ID and Priority can be set via the phone or web interface.

To configure VLAN settings via Phone interface:

1)Make sure the active User Type is admin or var

2)Press the Menu soft key [3. SETTINGS [2. ADVANCED.

3)Enter the password required, scroll to the 2.Network option, press the OK but- ton and select 2.VLAN, then press the OK button or the Enter soft key to enter.

4)Choose WAN Port and press the OK button or the Enter soft key to enter.

5)Use the LEFT or RIGHT navigation keys to choose and set the VLAN Status; input the VID Number and Priority.

6)Press the OK button or Save soft key to save the settings, or the Back soft key to return to VLAN menu.

To configure VLAN settings via the web interface:

Choose NETWORK[ADVANCED. Perform necessary changes. Check with the network administrator for more information.

35

Image 35
Contents IP120 Interference Information FCC RF Radiation Exposure StatementTable of Contents Service Warranty Assembling the IP120 Packing ListConnect Network and Power Network Settings Configuration and RegistrationTelephone Features and VoIP Service Providers Basic Configuration via Web InterfaceField Description Account SettingsBasic Configuration using phone keypad From here, you can enter the following parameters Overview IconDescription LEDsUser Interface Phone Options Phone UI WEB UI User levels Maintenance TasksAdministrator Mode IP120 allows three modes to configure the phonePhone Status General SettingsReboot To reboot via Web interfaceTo change Time and Date via the phone interface To enable the lock via Phone interfaceTime and Date Keypad LockRing Tones Audio SettingsVolume IP120 supports the following voice codecs To enable or disable the codecs via the web interfaceCodec Selection Edit/Add/Delete Contacts Contact ManagementTo move a contact to the Blacklist via the phone interface To edit or delete a contact via the phone interfaceTo search a contact via the phone interface Manage Blacklist via the web interfaceFrom the phone interface Outgoing callsCall Devices Call MethodsHot Line End of dialing key configurationAnonymous call To set Anonymous call rejection using the phone interfaceDial Plan To set Anonymous Call Services using the web interfaceHere is a dial plan example Incoming callsAnswering an incoming call Rejecting an incoming callTo configure Call Forward via Phone interface To configure the DND function via Phone interfaceFollowing call forwarding parameters can be configured To set Auto Answer via the web interface To configure Call Forward via the web interfaceAuto Answer To set Auto Answer via the phone interfaceCall Log Accessing the Call logAccessing the Missed Calls list Accessing Dial Calls listCall Waiting During an Active CallMute Call Transfer Call Waiting ConfigurationTo configure Call Waiting via the phone interface To configure Call Waiting via the web interfaceRetrieving Voicemail messages Voicemail settingsWay Conference VoicemailField Name Description Account SettingAdvanced Functions To configure Vlan settings via the web interface Advanced Network SettingsNetwork Settings To configure Vlan settings via Phone interface802.1X Reset to Factory SettingsTo configure the Https settings via the web interface To reset to factory via the phone interfaceDecryption Firmware Update and AutoprovisioningTo update the firmware manually via the web interface To launch Autoprovisioning using web interfaceTo set the AES Key via the phone interface Keys configurationTo enable the system log capture via web interface System Log ExportThis function can only be set via the web interface Default configuration of function keys for idle mode isLine keys Configuration Programmable keysConference LineSpeed Dial Pick Up TransferHold Call ReturnRedial Call ParkVoice Mail PrefixTrouble shooting How can users autoprovision? How to update the firmware?How can a user refuse incoming calls during a call? Page Service Warranty Limited Warranty Product Registration Limitation of WarrantyHow state law relates to this warranty Telefield NA Inc SW Griffith Dr. #205 Beaverton, Or