RCA IP120 Incoming calls, Answering an incoming call, Rejecting an incoming call, Explanation

Here is a dial plan example:

(111T[0-4] xxxxxxxxT)

Explanation:

111T This will dial 111 immediately after you entering the third digit. [0-4]xxxxxxxxT Any 9-digit number starting with 0,1,2,3 or 4 will be dialed out immediately after entering the 9th digit.

To create a Dial Plan in the web interface, use the following fields:

•Dial Plan: Enter the dial plan here.

•DP Enable: To enable or disable the dial plan.

•Dial Plan tmo: Timeout before the dial plan converts the calling number (if enabled).

•Dial End tmo: Timeout before the phone makes the call after the last digit of calling number is entered.

•Dial End tmo Enable: To enable or disable the Dial End Timeout.

• Hook Off tmo: Timeout for the phone to go back to idle mode after the handset is off the hook.

• Hook Off tmo Enable: To enable or disable the Hook Off Timeout.

Incoming calls

Answering an incoming call

1)Lift the handset, or press the SPEAKER button to answer using the speaker- phone, or press the HEADSET button to answer using the headset.

2)When already talking on the phone, press the corresponding line key or the OK button to answer the new call.

During an active call, users can alternate between Headset, Handset and Speaker phone by pressing the corresponding buttons or picking up the handset.

Rejecting an incoming call

Press the MUTE/CANCEL button to reject an incoming call.

27