RCA IP120 manual Firmware Update and Autoprovisioning, Decryption

Page 37

Note: When perform a factory reset, all current settings including contact list, call history, account settings, etc will be lost.

The phone will have to be configured manually or reprovisioned.

Firmware Update and Autoprovisioning

The phone is delivered with pre-installed firmware. If users require updating the phone’s firmware, please contact the system administrator. Updating the firmware

can only be done via the web interface.

To update the firmware manually via the web interface:

Choose SYSTEM [ UPGRADE; select the firmware file in the local computer. Click the upgrade button to update the new firmware.

Please do not power off during the updating.

To update the firmware and configuration automatically, auto provisioning can also be used.

Note: Please check with the network administrator or the service provider for auto- provisioning.

To launch Autoprovisioning using web interface:

Go to SYSTEM[PROVISIONING Settings

Set Auto Provision via phone interface:

1)Press the Menu soft key [3. SETTINGS [2.ADVANCED

2)Users will be prompted to enter the password

3)Scroll to 7. Auto Provision and press the OK button. Enter the URL, User Name and Password (if needed).

Press the OK button or the Save soft key to save the changes and reboot the phone.

Note: 1. Any power interruption during the subsequent process will most likely lead to a flash memory error. As a result the system may no longer be able to start properly. This procedure can be only conducted in Administrator Mode.

2. The upgrade priority is DHCP options then preconfigured URL .

Decryption

The IP120 supports configuration file encryption for provisioning. In case encryp- tion is used, the AES key needs to be configured on the phone.

To set the AES key via the web interface: Go to SYSTEM [ PROVISIONING SETTINGS

37

Image 37

Contents IP120 Interference Information FCC RF Radiation Exposure StatementTable of Contents Service Warranty Assembling the IP120 Packing ListConnect Network and Power Telephone Features and VoIP Service Providers Configuration and RegistrationBasic Configuration via Web Interface Network SettingsField Description Account SettingsBasic Configuration using phone keypad From here, you can enter the following parameters Overview IconDescription LEDsUser Interface Phone Options Phone UI WEB UI Administrator Mode Maintenance TasksIP120 allows three modes to configure the phone User levelsReboot General SettingsTo reboot via Web interface Phone StatusTime and Date To enable the lock via Phone interfaceKeypad Lock To change Time and Date via the phone interfaceVolume Audio SettingsRing Tones Codec Selection To enable or disable the codecs via the web interfaceIP120 supports the following voice codecs Edit/Add/Delete Contacts Contact ManagementTo move a contact to the Blacklist via the phone interface To edit or delete a contact via the phone interfaceTo search a contact via the phone interface Manage Blacklist via the web interfaceCall Devices Outgoing callsCall Methods From the phone interfaceHot Line End of dialing key configurationAnonymous call To set Anonymous call rejection using the phone interfaceDial Plan To set Anonymous Call Services using the web interfaceAnswering an incoming call Incoming callsRejecting an incoming call Here is a dial plan exampleFollowing call forwarding parameters can be configured To configure the DND function via Phone interfaceTo configure Call Forward via Phone interface Auto Answer To configure Call Forward via the web interfaceTo set Auto Answer via the phone interface To set Auto Answer via the web interfaceAccessing the Missed Calls list Accessing the Call logAccessing Dial Calls list Call LogMute During an Active CallCall Waiting To configure Call Waiting via the phone interface Call Waiting ConfigurationTo configure Call Waiting via the web interface Call TransferWay Conference Voicemail settingsVoicemail Retrieving Voicemail messagesAdvanced Functions Account SettingField Name Description Network Settings Advanced Network SettingsTo configure Vlan settings via Phone interface To configure Vlan settings via the web interfaceTo configure the Https settings via the web interface Reset to Factory SettingsTo reset to factory via the phone interface 802.1XTo update the firmware manually via the web interface Firmware Update and AutoprovisioningTo launch Autoprovisioning using web interface DecryptionTo enable the system log capture via web interface Keys configurationSystem Log Export To set the AES Key via the phone interfaceLine keys Configuration Default configuration of function keys for idle mode isProgrammable keys This function can only be set via the web interfaceSpeed Dial LineConference Hold TransferCall Return Pick UpVoice Mail Call ParkPrefix RedialTrouble shooting How can a user refuse incoming calls during a call? How to update the firmware?How can users autoprovision? Page Service Warranty Limited Warranty How state law relates to this warranty Limitation of WarrantyProduct Registration Telefield NA Inc SW Griffith Dr. #205 Beaverton, Or