Note: Ask the network administrator for the decrypt password.
To set the AES Key via the phone interface:
Press the Menu soft key[3. SETTINGS[2. ADVANCED[6. Set AES Key.
Enter the Common AES and the
Press the OK button or Save soft key to save the changes.
System Log Export
This feature capture a record of the system log to track any errors that may occur. To enable the system log capture via phone interface:
1)Make sure active User Type is admin
2)Press Menu soft key [ 2.FEATURES [ 8.LOGS SETTING
3)Use LEFT and RIGHT navigation keys to choose Enable
4)Press the OK button to save the changes
5)Reboot the phone
To enable the system log capture via web interface:
1)Go to SYSTEM [ LOG SETTINGS web page
2)Change the “Print Enable” to Enable
3)Press the Save button.
4)After the Log Settings is saved successfully, reboot the phone
To export the system log via web interface:
1)Make sure the logs setting is enabled.
2)Perform the operation on phone that causes the issue or error
3)Go to SYSTEM [ LOG SETTINGS web page of the phone
4)Press the “Export” button
5)After the log file is created successfully, press the link “Save it locally” to download the log file
Keys configuration
End of dialing key configuration
Admins can set a specific button (“#” or “*”) as the send key. If this feature is enabled, once a user has dialed the desired number, they can press this send key to dial the number immediately.
Please check END OF DIALING KEY configuration in the “Basic Calls” section for a complete description.
38