Radio Shack TAD-1006 owner manual TAD Preparation, Setting the DAY Time, Turning the TAD ON/OFF

Page 16

43-768.fm Page 16 Friday, August 13, 1999 2:49 PM

TAD PREPARATION

Complete the procedures in this sec- tion before you begin using the TAD to answer calls.

Notes:

•The keypad is located under the cover on the front of the TAD- 1006. Lift the cover to access the keys.

illustration

Notes:

•Once you turn on the TAD, it is set to answer calls (see “Setting the TAD to Answer/Not Answer Calls” on Page 20).

•You can also turn on the TAD remotely (see “Remote Answer- On” on Page 27).

SETTING THE DAY

AND TIME

•Before you begin any of the pro- cedures in this section, be sure the TAD is turned on (see “Turning the TAD On/Off”).

TURNING THE TAD

ON/OFF

To turn on the TAD, press ON/OFF so the ANSWER indicator turns on.

illustration

To turn off the TAD, press ON/OFF again so the ANSWER indicator turns off.

You must set the current day and time so the TAD will record the day and time on each incoming message, memo, and 2-way conversation it records.

Note: In Steps 2-6, you must enter your selection within 7 seconds after the TAD finishes saying the instruc- tion. Otherwise, the TAD beeps three times then exits the program mode. If this happens, start over again at Step 1.

1.Press DELETE/PROG. The TAD beeps once.

illustration

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents TAD-1006 Features TelephoneOutgoing Message Remote Skip Read this Before Installation FCC StatementContents Resetting the TAD-1006 Connecting the AC Adapter InstallationSelecting a Location Installing a Backup Battery Mounting Connecting the Wall BracketPlacing on a Desktop Mounting on a Wall Plate Mounting Directly on the Wall Connecting Handset Setting the TONE- Pulse SwitchUsing Memory Dialing Using RedialTelephone Operation Storing a Number in Memory Storing a Pause in Memory Dialing a Stored NumberTAD Preparation Setting the DAY TimeTurning the TAD ON/OFF Setting the Number of Rings Press one for AM, two for PMRecording Announcements Recording the Outgoing AnnouncementRecording the Memory Full Announcement Checking/Deleting the Outgoing AnnouncementChecking/Deleting the Memory Full Announcement TAD Operation Setting the TAD to ANSWER/NOT Answer CallsAnswering Calls Recording Announcement-Only Message Using the ANNOUNCEMENT-ONLY FeatureTurning Announcement-Only On/Off Recording a 2-WAY Conversation Screening CallsChecking/Deleting Announcement-Only Message Recording a Memo Playing MessagesPlaying 2-Way Conversations Playing Incoming MessagesPlaying Memos Deleting Messages To delete all incoming messagesRemote TAD Operation Using the TOLL-SAVERChanging Remote Code Using Remote Commands Remote ANSWER-ONFm Page 28 Friday, August 13, 1999 249 PM List of Remote Commands PressProblem Solving Problem Cause RemedyFm Page 31 Friday, August 13, 1999 249 PM Resetting Care and Maintenance FCC Wants YOU to Know LightningFm Page 35 Friday, August 13, 1999 249 PM Radio Shack

TAD-1006 specifications

The Radio Shack TAD-1006 is a notable technological artifact from the late 1980s and early 1990s that reflects the intersection of telecommunications and user-oriented design. This telephone answering device (TAD) was part of a broader trend in consumer electronics, aiming to enhance communication convenience for households.

One of the main features of the TAD-1006 is its ability to store and playback voice messages. The device uses a compact cassette mechanism to record audio messages, which was a common technology at the time. Users appreciated the straightforward operation, as the device allowed them to easily set up, record, and retrieve messages. With a recording time of approximately 15 minutes, the TAD-1006 could accommodate multiple messages, enabling users to manage their communications effectively.

The TAD-1006 also boasted a built-in speaker, facilitating easy playback of recorded messages without needing to connect to an external audio system. This feature, along with adjustable volume controls, ensured that users could play back messages at their desired sound level. Additionally, the unit came equipped with indicators and lights that helped users quickly identify when new messages were available, which enhanced the overall user experience.

In terms of technology, the TAD-1006 integrated a feature called "remote access," allowing users to check their messages from a remote location. This was a revolutionary aspect at the time, giving users the freedom to manage their voicemail even when they were away from home. The operation was simplified with a designated phone code, ensuring accessibility without the need for complex setups.

Durability and user-friendliness were paramount in the design of the TAD-1006, which featured an intuitive button layout for easy navigation through its various functionalities. The device was compact enough to fit comfortably on a desk or shelf while retaining a vintage aesthetic that appealed to many users of that era.

In summary, the Radio Shack TAD-1006 represented a significant development in personal communication technology. Its combination of features, including voice message storage, remote access capabilities, and ease of use, made it a popular choice among families looking to streamline their communication. Even today, the TAD-1006 stands as a nostalgic reminder of the era of analog voicemail systems and represents an important chapter in the evolution of answering machines.
Top Page Image Contents