Radio Shack TAD-1006 Using the ANNOUNCEMENT-ONLY Feature, Recording Announcement-Only Message

Page 21

43-768.fm Page 21 Friday, August 13, 1999 2:49 PM

•If the TAD answers when the memory is full, it plays the mem- ory full announcement, waits 7 seconds for any remote operation commands (see “Using Remote Commands” on Page 27), then hangs up. The TAD cannot record additional messages until you delete some of the old ones (see “Deleting Messages” on Page 25).

USING THE ANNOUNCEMENT-ONLY FEATURE

Your TAD’s announcement-only fea- ture lets you set the TAD-1006 to play a message for the caller, then auto- matically hang up without letting the caller leave a message. This is useful if you want to tell callers about an event.

Note: When the TAD is set for an- nouncement-only, you cannot set it to record calls using the remote com- mands as described in “Remote An- swer-On” on Page 27.

Recording the

Announcement-Only

Message

1.Press ANNOUNCE ONLY so the TAD beeps twice and the ANN indicator turns on, then press and hold OGM until the TAD beeps

once and the ANSWER indicator flashes.

illustration

2.Release OGM and record your message. Speak toward the front of the TAD-1006 from about 12 inches away.

3.When you finish speaking, press ON/OFF. The TAD beeps once and plays the announcement-only message, then the ANSWER indi- cator stops flashing and the TAD beeps again. The announcement- only feature is now on.

Turning Announcement-Only On/Off

To turn on the announcement-only feature at any time, press ANNOUNCE ONLY. The ANN indicator turns on and the TAD beeps twice.

To turn off the announcement-only feature, press ANNOUNCE ONLY. The ANN indicator turns off and the TAD beeps twice.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents TAD-1006 Telephone FeaturesOutgoing Message Remote Skip FCC Statement Read this Before InstallationContents Resetting the TAD-1006 Installation Connecting the AC AdapterSelecting a Location Installing a Backup Battery Connecting the Wall Bracket MountingPlacing on a Desktop Mounting on a Wall Plate Mounting Directly on the Wall Setting the TONE- Pulse Switch Connecting HandsetUsing Redial Using Memory DialingTelephone Operation Storing a Number in Memory Dialing a Stored Number Storing a Pause in MemorySetting the DAY Time TAD PreparationTurning the TAD ON/OFF Press one for AM, two for PM Setting the Number of RingsRecording the Outgoing Announcement Recording AnnouncementsChecking/Deleting the Outgoing Announcement Recording the Memory Full AnnouncementChecking/Deleting the Memory Full Announcement Setting the TAD to ANSWER/NOT Answer Calls TAD OperationAnswering Calls Using the ANNOUNCEMENT-ONLY Feature Recording Announcement-Only MessageTurning Announcement-Only On/Off Screening Calls Recording a 2-WAY ConversationChecking/Deleting Announcement-Only Message Playing Messages Recording a MemoPlaying Incoming Messages Playing 2-Way ConversationsPlaying Memos To delete all incoming messages Deleting MessagesUsing the TOLL-SAVER Remote TAD OperationChanging Remote Code Remote ANSWER-ON Using Remote CommandsFm Page 28 Friday, August 13, 1999 249 PM Press List of Remote CommandsProblem Cause Remedy Problem SolvingFm Page 31 Friday, August 13, 1999 249 PM Resetting Care and Maintenance Lightning FCC Wants YOU to KnowFm Page 35 Friday, August 13, 1999 249 PM Radio Shack

TAD-1006 specifications

The Radio Shack TAD-1006 is a notable technological artifact from the late 1980s and early 1990s that reflects the intersection of telecommunications and user-oriented design. This telephone answering device (TAD) was part of a broader trend in consumer electronics, aiming to enhance communication convenience for households.

One of the main features of the TAD-1006 is its ability to store and playback voice messages. The device uses a compact cassette mechanism to record audio messages, which was a common technology at the time. Users appreciated the straightforward operation, as the device allowed them to easily set up, record, and retrieve messages. With a recording time of approximately 15 minutes, the TAD-1006 could accommodate multiple messages, enabling users to manage their communications effectively.

The TAD-1006 also boasted a built-in speaker, facilitating easy playback of recorded messages without needing to connect to an external audio system. This feature, along with adjustable volume controls, ensured that users could play back messages at their desired sound level. Additionally, the unit came equipped with indicators and lights that helped users quickly identify when new messages were available, which enhanced the overall user experience.

In terms of technology, the TAD-1006 integrated a feature called "remote access," allowing users to check their messages from a remote location. This was a revolutionary aspect at the time, giving users the freedom to manage their voicemail even when they were away from home. The operation was simplified with a designated phone code, ensuring accessibility without the need for complex setups.

Durability and user-friendliness were paramount in the design of the TAD-1006, which featured an intuitive button layout for easy navigation through its various functionalities. The device was compact enough to fit comfortably on a desk or shelf while retaining a vintage aesthetic that appealed to many users of that era.

In summary, the Radio Shack TAD-1006 represented a significant development in personal communication technology. Its combination of features, including voice message storage, remote access capabilities, and ease of use, made it a popular choice among families looking to streamline their communication. Even today, the TAD-1006 stands as a nostalgic reminder of the era of analog voicemail systems and represents an important chapter in the evolution of answering machines.
Top Page Image Contents