Radio Shack TAD-1006 owner manual Installing a Backup Battery

Page 8

43-768.fm Page 8 Friday, August 13, 1999 2:49 PM

2.Plug the other end of the AC adapter into a standard AC outlet.

The TAD-1006 initializes, the L. BATT (low battery) indicator lights steadily, and the ANSWER, MEMO, and PLAY indicators flash six times. Then the TAD-1006 beeps once and the ANSWER indicator lights steadily.

illustration

Notes:

•Be sure not to press any of the TAD-1006’s buttons while you are plugging the adapter into the AC outlet. If you accidentally press a button, unplug the adapter from the AC outlet, then plug it back in.

•The answering system on your TAD-1006 cannot operate without AC power. However, you can make and answer calls on the telephone without AC power.

8

INSTALLING A BACKUP BATTERY

If AC power fails or you unplug the TAD-1006, a 9V backup battery (not supplied) saves the messages and the settings for the day, time, and security code. We recommend you use an al- kaline battery, such as Radio Shack Cat. No. 23-553.

1.To open the battery compartment cover on the bottom of the TAD- 1006, loosen the screw in the cover with a small Phillips screw- driver, then lift off the cover.

illustration

2.Snap the battery’s contacts firmly to the battery connector, then put the battery into the compartment.

illustration

3.Replace the cover, then tighten the screw.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents TAD-1006 Features TelephoneOutgoing Message Remote Skip Read this Before Installation FCC StatementContents Resetting the TAD-1006 Selecting a Location InstallationConnecting the AC Adapter Installing a Backup Battery Placing on a Desktop Connecting the Wall BracketMounting Mounting on a Wall Plate Mounting Directly on the Wall Connecting Handset Setting the TONE- Pulse SwitchTelephone Operation Using RedialUsing Memory Dialing Storing a Number in Memory Storing a Pause in Memory Dialing a Stored NumberTurning the TAD ON/OFF Setting the DAY TimeTAD Preparation Setting the Number of Rings Press one for AM, two for PMRecording Announcements Recording the Outgoing AnnouncementChecking/Deleting the Memory Full Announcement Checking/Deleting the Outgoing AnnouncementRecording the Memory Full Announcement Answering Calls Setting the TAD to ANSWER/NOT Answer CallsTAD Operation Turning Announcement-Only On/Off Using the ANNOUNCEMENT-ONLY FeatureRecording Announcement-Only Message Checking/Deleting Announcement-Only Message Screening CallsRecording a 2-WAY Conversation Recording a Memo Playing MessagesPlaying Memos Playing Incoming MessagesPlaying 2-Way Conversations Deleting Messages To delete all incoming messagesChanging Remote Code Using the TOLL-SAVERRemote TAD Operation Using Remote Commands Remote ANSWER-ONFm Page 28 Friday, August 13, 1999 249 PM List of Remote Commands PressProblem Solving Problem Cause RemedyFm Page 31 Friday, August 13, 1999 249 PM Resetting Care and Maintenance FCC Wants YOU to Know LightningFm Page 35 Friday, August 13, 1999 249 PM Radio Shack

TAD-1006 specifications

The Radio Shack TAD-1006 is a notable technological artifact from the late 1980s and early 1990s that reflects the intersection of telecommunications and user-oriented design. This telephone answering device (TAD) was part of a broader trend in consumer electronics, aiming to enhance communication convenience for households.

One of the main features of the TAD-1006 is its ability to store and playback voice messages. The device uses a compact cassette mechanism to record audio messages, which was a common technology at the time. Users appreciated the straightforward operation, as the device allowed them to easily set up, record, and retrieve messages. With a recording time of approximately 15 minutes, the TAD-1006 could accommodate multiple messages, enabling users to manage their communications effectively.

The TAD-1006 also boasted a built-in speaker, facilitating easy playback of recorded messages without needing to connect to an external audio system. This feature, along with adjustable volume controls, ensured that users could play back messages at their desired sound level. Additionally, the unit came equipped with indicators and lights that helped users quickly identify when new messages were available, which enhanced the overall user experience.

In terms of technology, the TAD-1006 integrated a feature called "remote access," allowing users to check their messages from a remote location. This was a revolutionary aspect at the time, giving users the freedom to manage their voicemail even when they were away from home. The operation was simplified with a designated phone code, ensuring accessibility without the need for complex setups.

Durability and user-friendliness were paramount in the design of the TAD-1006, which featured an intuitive button layout for easy navigation through its various functionalities. The device was compact enough to fit comfortably on a desk or shelf while retaining a vintage aesthetic that appealed to many users of that era.

In summary, the Radio Shack TAD-1006 represented a significant development in personal communication technology. Its combination of features, including voice message storage, remote access capabilities, and ease of use, made it a popular choice among families looking to streamline their communication. Even today, the TAD-1006 stands as a nostalgic reminder of the era of analog voicemail systems and represents an important chapter in the evolution of answering machines.
Top Page Image Contents