Radio Shack TAD-1006 owner manual Installation, Selecting a Location, Connecting the AC Adapter

Page 7

43-768.fm Page 7 Friday, August 13, 1999 2:49 PM

INSTALLATION

Important: To be sure your TAD-1006 works properly, follow this sequence to install it.

1.Select a location (see “Selecting a Location”).

2.Connect the AC adapter (see “Connecting the AC Adapter”).

3.Install a backup battery (see “Installing a Backup Battery” on Page 8).

company update the wiring for you.

•The phone company will charge you for the installation of neces- sary jacks.

•The USOC number of the jack to be installed is RJ11C for a base- board jack or RJ11W for a wall- plate jack.

4.Mount the TAD-1006 (see “Mount- ing the TAD-1006” on Page 9).

5.Connect the handset (see “Con- necting the Handset” on Page 12).

6.Set the TONE-PULSEswitch (see

“Setting the TONE-PULSE Switch” on Page 12).

SELECTING A

LOCATION

Select a location for the TAD-1006 that is near a modular phone jack and an AC outlet, and out of the way of normal activities. You can place the TAD-1006 on a flat surface (such as a desktop or counter-top), mount it on a modular jack wall plate, or mount it di- rectly on the wall.

CONNECTING THE AC ADAPTER

Caution: You must use a Class II AC adapter that supplies 12 volts of pow- er, delivers at least 200 milliamps, and has a plug that properly fits the TAD- 1006’s 12V DC jack with its center tip set to negative. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the adapter and the TAD-1006.

illustration

Notes:

•If the phone line jack is not a mod- ular jack, you must update the wir- ing. You can convert the wiring yourself, using jacks and adapters available at any Radio Shack store. Or, you can let the phone

1.Insert the small round plug of the supplied AC adapter into the 12V DC jack, then press the adapter’s cord into the strain-relief slot on the bottom of the TAD-1006.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TAD-1006 Telephone FeaturesOutgoing Message Remote Skip FCC Statement Read this Before InstallationContents Resetting the TAD-1006 Connecting the AC Adapter InstallationSelecting a Location Installing a Backup Battery Mounting Connecting the Wall BracketPlacing on a Desktop Mounting on a Wall Plate Mounting Directly on the Wall Setting the TONE- Pulse Switch Connecting HandsetUsing Memory Dialing Using RedialTelephone Operation Storing a Number in Memory Dialing a Stored Number Storing a Pause in MemoryTAD Preparation Setting the DAY TimeTurning the TAD ON/OFF Press one for AM, two for PM Setting the Number of RingsRecording the Outgoing Announcement Recording AnnouncementsRecording the Memory Full Announcement Checking/Deleting the Outgoing AnnouncementChecking/Deleting the Memory Full Announcement TAD Operation Setting the TAD to ANSWER/NOT Answer CallsAnswering Calls Recording Announcement-Only Message Using the ANNOUNCEMENT-ONLY FeatureTurning Announcement-Only On/Off Recording a 2-WAY Conversation Screening CallsChecking/Deleting Announcement-Only Message Playing Messages Recording a MemoPlaying 2-Way Conversations Playing Incoming MessagesPlaying Memos To delete all incoming messages Deleting MessagesRemote TAD Operation Using the TOLL-SAVERChanging Remote Code Remote ANSWER-ON Using Remote CommandsFm Page 28 Friday, August 13, 1999 249 PM Press List of Remote CommandsProblem Cause Remedy Problem SolvingFm Page 31 Friday, August 13, 1999 249 PM Resetting Care and Maintenance Lightning FCC Wants YOU to KnowFm Page 35 Friday, August 13, 1999 249 PM Radio Shack

TAD-1006 specifications

The Radio Shack TAD-1006 is a notable technological artifact from the late 1980s and early 1990s that reflects the intersection of telecommunications and user-oriented design. This telephone answering device (TAD) was part of a broader trend in consumer electronics, aiming to enhance communication convenience for households.

One of the main features of the TAD-1006 is its ability to store and playback voice messages. The device uses a compact cassette mechanism to record audio messages, which was a common technology at the time. Users appreciated the straightforward operation, as the device allowed them to easily set up, record, and retrieve messages. With a recording time of approximately 15 minutes, the TAD-1006 could accommodate multiple messages, enabling users to manage their communications effectively.

The TAD-1006 also boasted a built-in speaker, facilitating easy playback of recorded messages without needing to connect to an external audio system. This feature, along with adjustable volume controls, ensured that users could play back messages at their desired sound level. Additionally, the unit came equipped with indicators and lights that helped users quickly identify when new messages were available, which enhanced the overall user experience.

In terms of technology, the TAD-1006 integrated a feature called "remote access," allowing users to check their messages from a remote location. This was a revolutionary aspect at the time, giving users the freedom to manage their voicemail even when they were away from home. The operation was simplified with a designated phone code, ensuring accessibility without the need for complex setups.

Durability and user-friendliness were paramount in the design of the TAD-1006, which featured an intuitive button layout for easy navigation through its various functionalities. The device was compact enough to fit comfortably on a desk or shelf while retaining a vintage aesthetic that appealed to many users of that era.

In summary, the Radio Shack TAD-1006 represented a significant development in personal communication technology. Its combination of features, including voice message storage, remote access capabilities, and ease of use, made it a popular choice among families looking to streamline their communication. Even today, the TAD-1006 stands as a nostalgic reminder of the era of analog voicemail systems and represents an important chapter in the evolution of answering machines.
Top Page Image Contents