Radio Shack TAD-1006 owner manual Recording Announcements, Recording the Outgoing Announcement

Page 18

43-768.fm Page 18 Friday, August 13, 1999 2:49 PM

RECORDING ANNOUNCEMENTS

Recording the Outgoing Announcement

The TAD has a built-in outgoing an- nouncement that says “Please leave your message after the tone.”

You can record a different announce- ment (up to 1 minute long) for the call- er to hear when the TAD answers a call.

Important Hints:

•We recommend you write down your announcement before recording it. If you plan to record caller’s messages, ask for the caller’s name, phone number, and message.

•For your security, do not tell call- ers that you are not home. Instead, say that you cannot come to the phone right now.

Follow these steps to record your out- going announcement.

1.Press and hold OGM (outgoing message) until the TAD beeps and the ANSWER indicator flashes.

illustration

18

2.Release OGM and record your announcement (at least 2 sec- onds, but no more than 1 minute long). Speak toward the front of the TAD-1006 from about 12 inches away.

illustration

Note: Be sure the outgoing mes- sage you record is at least 2 sec- onds long, otherwise the TAD might not operate properly.

3.When you finish speaking, press ON/OFF. The TAD beeps once, the announcement plays, then the ANSWER indicator stops flashing and the TAD beeps once more.

Notes:

•If you do not press ON/OFF, the TAD automatically stops recording after 1 minute then plays the announcement you recorded.

•To change the outgoing announcement, you can repeat these steps to record over the cur- rent one, or delete the current one so the TAD uses its built-in outgo- ing announcement (see “Check- ing/Deleting the Outgoing An- nouncement”).

Page 17 Page 19
Image 18
Page 17 Page 19
Contents TAD-1006 Features TelephoneOutgoing Message Remote Skip Read this Before Installation FCC StatementContents Resetting the TAD-1006 Installation Connecting the AC AdapterSelecting a Location Installing a Backup Battery Connecting the Wall Bracket MountingPlacing on a Desktop Mounting on a Wall Plate Mounting Directly on the Wall Connecting Handset Setting the TONE- Pulse SwitchUsing Redial Using Memory DialingTelephone Operation Storing a Number in Memory Storing a Pause in Memory Dialing a Stored NumberSetting the DAY Time TAD PreparationTurning the TAD ON/OFF Setting the Number of Rings Press one for AM, two for PMRecording Announcements Recording the Outgoing AnnouncementChecking/Deleting the Outgoing Announcement Recording the Memory Full AnnouncementChecking/Deleting the Memory Full Announcement Setting the TAD to ANSWER/NOT Answer Calls TAD OperationAnswering Calls Using the ANNOUNCEMENT-ONLY Feature Recording Announcement-Only MessageTurning Announcement-Only On/Off Screening Calls Recording a 2-WAY ConversationChecking/Deleting Announcement-Only Message Recording a Memo Playing MessagesPlaying Incoming Messages Playing 2-Way ConversationsPlaying Memos Deleting Messages To delete all incoming messagesUsing the TOLL-SAVER Remote TAD OperationChanging Remote Code Using Remote Commands Remote ANSWER-ONFm Page 28 Friday, August 13, 1999 249 PM List of Remote Commands PressProblem Solving Problem Cause RemedyFm Page 31 Friday, August 13, 1999 249 PM Resetting Care and Maintenance FCC Wants YOU to Know LightningFm Page 35 Friday, August 13, 1999 249 PM Radio Shack

TAD-1006 specifications

The Radio Shack TAD-1006 is a notable technological artifact from the late 1980s and early 1990s that reflects the intersection of telecommunications and user-oriented design. This telephone answering device (TAD) was part of a broader trend in consumer electronics, aiming to enhance communication convenience for households.

One of the main features of the TAD-1006 is its ability to store and playback voice messages. The device uses a compact cassette mechanism to record audio messages, which was a common technology at the time. Users appreciated the straightforward operation, as the device allowed them to easily set up, record, and retrieve messages. With a recording time of approximately 15 minutes, the TAD-1006 could accommodate multiple messages, enabling users to manage their communications effectively.

The TAD-1006 also boasted a built-in speaker, facilitating easy playback of recorded messages without needing to connect to an external audio system. This feature, along with adjustable volume controls, ensured that users could play back messages at their desired sound level. Additionally, the unit came equipped with indicators and lights that helped users quickly identify when new messages were available, which enhanced the overall user experience.

In terms of technology, the TAD-1006 integrated a feature called "remote access," allowing users to check their messages from a remote location. This was a revolutionary aspect at the time, giving users the freedom to manage their voicemail even when they were away from home. The operation was simplified with a designated phone code, ensuring accessibility without the need for complex setups.

Durability and user-friendliness were paramount in the design of the TAD-1006, which featured an intuitive button layout for easy navigation through its various functionalities. The device was compact enough to fit comfortably on a desk or shelf while retaining a vintage aesthetic that appealed to many users of that era.

In summary, the Radio Shack TAD-1006 represented a significant development in personal communication technology. Its combination of features, including voice message storage, remote access capabilities, and ease of use, made it a popular choice among families looking to streamline their communication. Even today, the TAD-1006 stands as a nostalgic reminder of the era of analog voicemail systems and represents an important chapter in the evolution of answering machines.
Top Page Image Contents