Radio Shack TAD-1006 TAD Operation, Setting the TAD to ANSWER/NOT Answer Calls, Answering Calls

Page 20

43-768.fm Page 20 Friday, August 13, 1999 2:49 PM

TAD OPERATION

Be sure you complete the procedures in “Installation” and “TAD Preparation” before you begin using the TAD.

SETTING THE TAD TO ANSWER/NOT ANSWER CALLS

To set the TAD to answer calls, simply turn it on by pressing ON/OFF so the ANSWER indicator turns on.

illustration

Note: You can also use a remote phone to set the TAD to answer calls. See “Remote Answer-On” on Page 27.

To set the TAD to not answer calls, simply turn it off by pressing ON/OFF so the ANSWER indicator turns off.

Answering Calls

After the TAD answers a call, the out- going announcement plays, then the TAD sounds a beep and begins re- cording.

After the call is over (when the caller hangs up or the maximum message length of 1 minute is reached), the TAD hangs up and resets to answer

the next call. The PLAY indicator flashes to indicate an incoming mes- sage(s) has been recorded.

illustration

Notes:

•Many local phone companies use calling party control (CPC) to sig- nal that the caller has hung up. Your TAD recognizes a CPC sig- nal and releases the line. If the TAD records phone company messages or dial tones, your local phone company probably does not use CPC.

•If the TAD reaches 100 percent full while a caller is leaving a mes- sage, the TAD hangs up. When the next call comes in, the TAD plays the memory full announce- ment.

•If the caller hangs up or is silent for more than 7 seconds after speaking for less than 2 seconds, or if the incoming message is less than 2 seconds in length, the TAD hangs up and resets to answer the next call, but does not record a message.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents TAD-1006 Features TelephoneOutgoing Message Remote Skip Read this Before Installation FCC StatementContents Resetting the TAD-1006 Selecting a Location InstallationConnecting the AC Adapter Installing a Backup Battery Placing on a Desktop Connecting the Wall BracketMounting Mounting on a Wall Plate Mounting Directly on the Wall Connecting Handset Setting the TONE- Pulse SwitchTelephone Operation Using RedialUsing Memory Dialing Storing a Number in Memory Storing a Pause in Memory Dialing a Stored NumberTurning the TAD ON/OFF Setting the DAY TimeTAD Preparation Setting the Number of Rings Press one for AM, two for PMRecording Announcements Recording the Outgoing AnnouncementChecking/Deleting the Memory Full Announcement Checking/Deleting the Outgoing AnnouncementRecording the Memory Full Announcement Answering Calls Setting the TAD to ANSWER/NOT Answer CallsTAD Operation Turning Announcement-Only On/Off Using the ANNOUNCEMENT-ONLY FeatureRecording Announcement-Only Message Checking/Deleting Announcement-Only Message Screening CallsRecording a 2-WAY Conversation Recording a Memo Playing MessagesPlaying Memos Playing Incoming MessagesPlaying 2-Way Conversations Deleting Messages To delete all incoming messagesChanging Remote Code Using the TOLL-SAVERRemote TAD Operation Using Remote Commands Remote ANSWER-ONFm Page 28 Friday, August 13, 1999 249 PM List of Remote Commands PressProblem Solving Problem Cause RemedyFm Page 31 Friday, August 13, 1999 249 PM Resetting Care and Maintenance FCC Wants YOU to Know LightningFm Page 35 Friday, August 13, 1999 249 PM Radio Shack

TAD-1006 specifications

The Radio Shack TAD-1006 is a notable technological artifact from the late 1980s and early 1990s that reflects the intersection of telecommunications and user-oriented design. This telephone answering device (TAD) was part of a broader trend in consumer electronics, aiming to enhance communication convenience for households.

One of the main features of the TAD-1006 is its ability to store and playback voice messages. The device uses a compact cassette mechanism to record audio messages, which was a common technology at the time. Users appreciated the straightforward operation, as the device allowed them to easily set up, record, and retrieve messages. With a recording time of approximately 15 minutes, the TAD-1006 could accommodate multiple messages, enabling users to manage their communications effectively.

The TAD-1006 also boasted a built-in speaker, facilitating easy playback of recorded messages without needing to connect to an external audio system. This feature, along with adjustable volume controls, ensured that users could play back messages at their desired sound level. Additionally, the unit came equipped with indicators and lights that helped users quickly identify when new messages were available, which enhanced the overall user experience.

In terms of technology, the TAD-1006 integrated a feature called "remote access," allowing users to check their messages from a remote location. This was a revolutionary aspect at the time, giving users the freedom to manage their voicemail even when they were away from home. The operation was simplified with a designated phone code, ensuring accessibility without the need for complex setups.

Durability and user-friendliness were paramount in the design of the TAD-1006, which featured an intuitive button layout for easy navigation through its various functionalities. The device was compact enough to fit comfortably on a desk or shelf while retaining a vintage aesthetic that appealed to many users of that era.

In summary, the Radio Shack TAD-1006 represented a significant development in personal communication technology. Its combination of features, including voice message storage, remote access capabilities, and ease of use, made it a popular choice among families looking to streamline their communication. Even today, the TAD-1006 stands as a nostalgic reminder of the era of analog voicemail systems and represents an important chapter in the evolution of answering machines.
Top Page Image Contents