2. Press 1/TIME. The TAD says,
“Press one for Monday, two for Tuesday, three for Wednesday, four for Thursday, five for Friday, six for Saturday, seven for Sun- day.”
illustration
3.Press a number button to set the day of the week. The TAD says the day of week and, “Enter the time.”
4.Press two digits for the hour. The TAD says the hour.
Note: If you make an invalid entry (for example, 00 or 13), the TAD beeps three times and repeats,
“Enter the time.”
5.Press two digits for the minute. The TAD says the minute and,
“Press one for AM, two for PM.”
Note: If you make an invalid entry (for example, 66), the TAD does not respond. Make a correct entry within 7 seconds.
6.Press 1 or 2. The TAD says, “AM ” or, “PM,” then the current day and time.
To hear the current day of the week and time at any time, press 1/TIME.
SETTING THE NUMBER OF RINGS
The TAD is preset to sound four rings before it answers the first call. Follow these steps to change the number of rings (from
Notes:
•If you plan to check your mes- sages by long distance, be sure the number of rings is set to at least three to avoid unnecessary long distance charges when you call to check your messages (see “Using the
•In Steps 2 and 3, you must enter your selection within 7 seconds. Otherwise, the TAD beeps three times then exits the programming mode. If this happens, start over again at Step 1.
1.Press DELETE/PROG. The TAD beeps once.
2.Press 3/RING. The TAD beeps once.
illustration
3.Enter the desired number of rings (up to 9) using the small keypad on the TAD. The TAD repeats the number, then beeps twice.
17