ClearSounds CL600 manual Diagram #19

To program your one-touch memory dial buttons please follow instructions below:

1.Lift the handset.

2.Press the PROG (program) button (See diagram #16).

3.Using the keypad, dial the number you would like to save, including “1” and the area code (if applicable). (See diagram #17).

4.Press one of the Priority or Memory Dial buttons (M1 – M6) located on top of the phone (See diagram #18). Each button can be programmed (or reprogrammed using the same procedure) for a phone number.

5.The Caller ID Screen will display <<SAVE OK>> (See diagram #19).

6.To register your stored phone numbers, use the phonebook insert card located under the base.

NOTE: Numbers will be lost if the phone is not receiving any power, either through the phone line, batteries, AC adapter during a storm, power outage or if you disconnect the phone. Entering a new number in the same location will automatically erase the previous number.

DIAGRAM #16	DIAGRAM #17	DIAGRAM #18
Program Button	Telephone Keypad	Memory / Priority Buttons

DIAGRAM #19

LCD Display

If at any time you have questions about your telephone please contact our ClearSounds Customer Service Department at: 1-800-965-9043.

15