GE 28041xx3 Do Not Disturb DND, Room Monitor, To cancel, press the do not Disturb button again

Page 33

HIGH

LOW OFF

1.Make sure the phone is OFF (not in talk mode).

2.Press the #PAUSE/RINGER button to enter the RINGER VOLUME menu.

RINGER VOLUME

3.Use the 6 or 5 button to scroll to the desired ringer volume. The default is LOW.

4.Press the SELECT or #PAUSE/RINGER button again to save your selection. You will hear a confirmation tone.

Do Not Disturb (DND)

This feature allows you to turn off all the handset ringer(s) at once,by pressing one button at the base unit, even though the ringer volume of handset(s) has been set to HIGH or LOW.

1.In the standby mode, press the DO NOT DISTURB button on the base.

2.The DND indicator will light and DO NOT DISTURB shows in each handset display.

3.To cancel, press the DO NOT DISTURB button again.

NOTE: You can press the DO NOT DISTURB button and activate the function immediately, even when there is incoming call ringing in, or during call screening after the call is taken by the answerer.

Room Monitor

(This is only applicable when 2 or more handsets are registered to the same base unit.

IMPORTANT NOTE: The following procedures can ONLY be done with Model 28011 and 28041 handsets.

1.Make sure your handset and the handset to be monitored are NOT in talk mode.

2.Press the MENU button and use the 6 or 5 button to scroll to ROOM MONITOR.

3.Press the SELECT button and all the registered handset names and numbers show on the display.

4.Use the 6 or 5 button to select the desired handset. Press the SELECT button to conﬁirm.

33

Image 33

Contents Model Notification to the Local Telephone Company Equipment Approval InformationHearing Aid Compatibility HAC Interference InformationLicensing FCC RF Radiation Exposure StatementTable of Contents Handset Sound Signals Troubleshooting Guide Introduction Parts Checklist for modelBefore You Begin Make sure your package includes the items shown hereCompany to find out how to get one installed InstallationTelephone Jack Requirements Digital Security SystemImportant Installation Guidelines Menu Handset LayoutReview Base LayoutInstalling the Phone Installing the Handset BatteryBattery Pack Black wire Wall Mounting Base StationAnswering System Setup Setting the Voice Prompt LanguageVoice Time/Day Stamp and Real Time Clock Speaker Volume Recording the Outgoing AnnouncementSample Single Mailbox Outgoing Announcement Audible Quick Setup Guide Programming the TelephoneReviewing and Choosing the Announcement Language Phone SettingRegistration Area CodeIs no Number. You will hear a confirmation toneDeregistration Handset NameGlobal De-Registration Default is YESSelect NO, if you do not want to deregister No YES CONFIRM? shows on the displayDisplay Setting Default SettingWallpaper Set Contrast Color SchemeFrom the Sound Setting menu Ringer VolumeRinger Tone Key ToneMessage Counter Answering System OperationLeaving a Message Mailbox IndicatorScreening Calls from the Base Memory FullMessages Playback To erase a message using the handsetErasing Messages To erase a message while it is playingAnswering System Remote Access Remote Access from Cordless HandsetLeaving a Memo Ring to Answer Remote Access Security CodeWhen the answering system picks up Remote Access from Another LocationRemote feature lets you perform the following functions New Message AlertVisual Ring Indicator on the Handset CHARGE/IN USE Indicator on the BaseTelephone Operation Standby ScreenCall Timer VolumeMaking a Call Answering a CallLast Number Redial ExitPaging from the Base/Group Ringer Volume Shortcut MuteHandset to Handset Paging To cancel, press the do not Disturb button again Do Not Disturb DNDRoom Monitor Handset to Handset Intercom Call Intercom OperationUsing Intercom with External Telephone Calls Advanced Intercom FeaturesReceiving an Intercom Call Receiving an Incoming Call During an Intercom CallThree-way Conferencing Call TransferTransferring Calls to Other Handsets One touch three-way conferencing by another handsetCall Waiting Caller ID Caller ID CIDReceiving CID Records CID Error CodesStoring CID Records In CID Memory Reviewing CID RecordsEleven digits Storing CID Records into Phone BookTen digits Seven digitsDeleting All CID Records Deleting a CID RecordAdding Phone Book Entries Phone BookUse the 6 or 5 button to scroll to your desired picture Storing the Last Number DialedReviewing Phone Book Records Make sure your phone is OFF not in talk modeEditing a Phone Book Record Dial a phone book record while in talk modeDeleting a Phone Book Record Dialing a Phone Book RecordPicture Download One-Time Software InstallationChain Dialing from Phone Book Download Your Own ImageImage Downloading Refer to Section Telephone Setup/Display Setting/ WallpaperChoosing the Downloaded Image as Wallpaper Image EditingRecord Your Own Ringer Tones Recording Ringer TonesUse the 6 or 5 button to scroll to the Audiocable or Record with Included Audio Cable or an Optional HeadsetPress the Select button to enter To replay the recorded ringer toneRecord with the Handset Microphone Refer to Section Telephone Setup/Sound Setting/Ringer ToneChoosing the Recorded Sound Clip as Ringer Tone Assigning the Recorded Sound Clip to Phone Book RecordConnecting the Belt Clip Changing the BatteryConnecting an Optional Headset to the Handset Belt Clip and Optional HeadsetDisplay Messages Battery Safety PrecautionsIndicates the handset is in speakerphone mode Indicates the battery needs to be chargedMemory locations HandsetTroubleshooting Guide Handset Sound SignalsTelephone Solutions Answering System Display MessagesPage Handset displays Handset Needs Registration Caller ID SolutionsBattery Solutions Causes of Poor ReceptionGeneral Product Care Accessory Information ServiceIndex 49 W For how long after your purchase Limited WarrantyIf you purchased your product outside the USA Model