GE 8041, 8011 Record with the Handset Microphone, Choosing the Recorded Sound Clip as Ringer Tone

Page 49

To re-record the ringer tone:

1.Use the 6 or 5 button to scroll to RE-RECORD.

2.Press the SELECT button to confirm, and the display will show the count-down display again.

3.Follow the recording steps to record the ringer tone.

Record with the Handset Microphone

From the REC RING TONE menu;

AUDIO_CABLE

HEADSET

MICROPHONE

REC RINGER TONE

PRESS SELECT TO

START

12 SECONDS

MICROPHONE

REPLAY

RE-RECORD

MICROPHONE

1.Use the 6 or 5 button to scroll to the MICROPHONE.

2.Press the SELECT button to enter the count-down display.

3.Press the SELECT button to start, then the handset will start recording and the second number will decrease automatically.

4.The recording will stop when the display counts down to 0 seconds.

Or you may press the SELECT button any time to stop.

When the recording stops, the display will show 2 options: REPLAY and RE-RECORD. Follow the steps under section "Record with Included Audio Cable or an Optional Headset" to replay the recorded ringer tone or re-record the ringer tone.

IMPORTANT NOTE: When you want to use the handset microphone to record ringer tones, DO NOT insert the Audio cable or the optional headset into the headset jack of the handset.

Choosing the Recorded Sound Clip as Ringer Tone

Refer to Section; "Telephone Setup/Sound Setting/Ringer Tone".

Assigning the Recorded Sound Clip to Phone Book Record

Refer to Section; "Phone Book/Adding Phone Book Entries and Phone Book/Editing a Phone Book Record".

49

Image 49

Contents Model Notification to the Local Telephone Company Equipment Approval InformationHearing Aid Compatibility HAC Interference InformationLicensing FCC RF Radiation Exposure StatementTable of Contents Handset Sound Signals Troubleshooting Guide Introduction Parts Checklist for modelBefore You Begin Make sure your package includes the items shown hereCompany to find out how to get one installed InstallationTelephone Jack Requirements Digital Security SystemImportant Installation Guidelines Menu Handset LayoutReview Base LayoutInstalling the Handset Battery Installing the PhoneBattery Pack Black wire Wall Mounting Base StationSetting the Voice Prompt Language Answering System SetupVoice Time/Day Stamp and Real Time Clock Recording the Outgoing Announcement Speaker VolumeSample Single Mailbox Outgoing Announcement Programming the Telephone Audible Quick Setup GuideReviewing and Choosing the Announcement Language Phone SettingRegistration Area CodeIs no Number. You will hear a confirmation toneDeregistration Handset NameGlobal De-Registration Default is YESSelect NO, if you do not want to deregister No YES CONFIRM? shows on the displayDefault Setting Display SettingWallpaper Set Contrast Color SchemeFrom the Sound Setting menu Ringer VolumeRinger Tone Key ToneMessage Counter Answering System OperationLeaving a Message Mailbox IndicatorScreening Calls from the Base Memory FullMessages Playback To erase a message using the handsetErasing Messages To erase a message while it is playingRemote Access from Cordless Handset Answering System Remote AccessLeaving a Memo Ring to Answer Remote Access Security CodeWhen the answering system picks up Remote Access from Another LocationRemote feature lets you perform the following functions New Message AlertVisual Ring Indicator on the Handset CHARGE/IN USE Indicator on the BaseTelephone Operation Standby ScreenCall Timer VolumeMaking a Call Answering a CallExit Last Number RedialPaging from the Base/Group Mute Ringer Volume ShortcutHandset to Handset Paging Do Not Disturb DND To cancel, press the do not Disturb button againRoom Monitor Handset to Handset Intercom Call Intercom OperationUsing Intercom with External Telephone Calls Advanced Intercom FeaturesReceiving an Intercom Call Receiving an Incoming Call During an Intercom CallThree-way Conferencing Call TransferTransferring Calls to Other Handsets One touch three-way conferencing by another handsetCall Waiting Caller ID Caller ID CIDReceiving CID Records CID Error CodesStoring CID Records In CID Memory Reviewing CID RecordsEleven digits Storing CID Records into Phone BookTen digits Seven digitsDeleting All CID Records Deleting a CID RecordAdding Phone Book Entries Phone BookUse the 6 or 5 button to scroll to your desired picture Storing the Last Number DialedReviewing Phone Book Records Make sure your phone is OFF not in talk modeEditing a Phone Book Record Dial a phone book record while in talk modeDeleting a Phone Book Record Dialing a Phone Book RecordPicture Download One-Time Software InstallationChain Dialing from Phone Book Download Your Own ImageImage Downloading Refer to Section Telephone Setup/Display Setting/ WallpaperChoosing the Downloaded Image as Wallpaper Image EditingRecord Your Own Ringer Tones Recording Ringer TonesUse the 6 or 5 button to scroll to the Audiocable or Record with Included Audio Cable or an Optional HeadsetPress the Select button to enter To replay the recorded ringer toneRecord with the Handset Microphone Refer to Section Telephone Setup/Sound Setting/Ringer ToneChoosing the Recorded Sound Clip as Ringer Tone Assigning the Recorded Sound Clip to Phone Book RecordConnecting the Belt Clip Changing the BatteryConnecting an Optional Headset to the Handset Belt Clip and Optional HeadsetDisplay Messages Battery Safety PrecautionsIndicates the handset is in speakerphone mode Indicates the battery needs to be chargedMemory locations HandsetTroubleshooting Guide Handset Sound SignalsTelephone Solutions Answering System Display MessagesPage Handset displays Handset Needs Registration Caller ID SolutionsCauses of Poor Reception Battery SolutionsGeneral Product Care Accessory Information ServiceIndex 49 W For how long after your purchase Limited WarrantyIf you purchased your product outside the USA Model