GE 29438 manual Flash Duration, Pause Duration

FLASH DURATION

You can change the duration of the FLASH button in order to match your local custom

calling services if you are having trouble

when using the default setting of 600STORE/IN button milliseconds.

The time can be set from 100 - 900 milliseconds (in increments of 100 milliseconds):

1. Press STORE/IN.

19

210

311

412

513

614

715

LOWER

816

2.Press a number on the keypad 1-9 (representing 100 ms each).To set to the default, press 0.

TWO LINE DATAPHONE

TIMER	SET	MEMO
FLASH BUSY REDIAL PAUSE		REDIAL

STORE/IN

CONF

3.Press STORE/IN and then press the FLASH button.

PAUSE DURATION

1	ABC 2		DEF 3	line
				2
GHI 4	JKL 5		MNO 6
RS 7		8	YZ 9	line1
PQ	TUV		WX
TONE*	OPER0		#	HOLD

VOL

MUTESPEAKER

The default setting for the PAUSE button is
auto tone, which pauses until there is a dial
tone. However, you may need to change the FLASH button	PAUSE button
duration of the PAUSE button in order to
match the amount of time needed to
complete chain or link dialing.
The delay can be set from 1 - 9 seconds (in
1 second increments):
1. Press STORE/IN.
2. Press a number key to choose the
seconds (1-9, auto tone is 0).
3. Press STORE/IN and then press the
PAUSE button.

TIP: You might have to experiment in order to get the exact timing for access to a particular service; thus it may be easier to use chain dialing and wait for each access tone before pressing the next memory location button.

26