GE 28118 manual Ringer Tone, Ringer Volume, Shortcut to the ringer volume function

4.Press the menu ok/mute button to save your name. You will hear a confirmation tone and the handset name shows in the display.

Ringer Tone

You may choose from ten different ringer tones and ten different melodies.

From the Handset Setup Menu:

1.Press the vol/CID ( 6 or 5) button to scroll to the RINGER TONE sub-menu.

2.Press the menu ok/mute button to enter the menu. SET RINGER TONE 01 shows in the display. The default setting is 01.

3.Use the vol/CID ( 6 or 5) button to scroll to the desired setting (1 through 20). You will hear a sample of the ringer tone/melody you select.

4.Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the selected ringer tone shows in the display.

NOTE: You must have the Ringer Volume set to ON for ring tone to signal an incoming call.

Ringer Volume

From the Handset Setup Menu:

1.Press the vol/CID ( 6 or 5) button to scroll to the RINGER VOLUME sub-menu.

2.Press the menu ok/mute button to enter the menu. SET RINGER 41HI 2LO 3OFF shows in the display. The default setting is HI.

3.Use the touch tone pad on the handset to select 1, 2 or 3, or use the vol/CID ( 6 or 5) button to scroll to your selection. HI is the default setting.

4.Press the menu ok/mute button to save your selection. You will hear a confirmation tone and the new volume setting shows in the display.

NOTE: If you turn the ringer OFF, the ringer off icon shows in the display.

Shortcut to the ringer volume function:

1.Make sure the phone is OFF (not in talk mode).

2.Press the #pause/ringer button to display SET RINGER 1HI 2LOW 3OFF.

3.Use the touch tone pad on the handset to select 1, 2 or 3, or use the vol/CID ( 6 or 5) button to scroll to your selection.

4.Press #pause/ringer button again to save and display the new selection for a few seconds.

17