GE 28118 manual Telephone Operation, Visual Indicators, Speakerphone Operation, Making a Call

Telephone Operation

Visual Indicators

Charge Indicator on Base

The charge indicator will remain lit when a handset is in the base charging.

In Use Indicator on Base

The in use indicator on the base will flash to alert you to an incoming call, during paging, or if you have a message waiting from your service provider. The indicator will remain lit when the line is in use.

IMPORTANT: In order to use this unit’s Visual Message Waiting Indicator (VMWI) feature, you must subscribe to this service from your phone company.

Speakerphone Operation.

NOTE: If you are using the speakerphone, remain close to handset so the party you are speaking to can hear you.

Press the speaker button to switch from handset to speaker mode.

Press the talk button to switch from speakerphone to handset mode.

Press the end button to end conversation.

Making a Call

1. Press the talk or speaker button. Dial the desired number. - OR -

Dial the number first, then press the talk or speaker button. - OR -

Press the vol/CID ( 6 or 5) button to select the desired record, then press the talk or speaker button.

2.When finished, press the end button to hang up.

NOTE: You may enter up to 32 pre-dial digits.

NOTE: If you want to delete the pre-dial number you entered, press the del/conf/intercom button until all of the digits are erased.

24