GE 28118 manual Mute, Receiver Volume Control, Making an Intercom Call

Mute

To have a private, off-line conversation, use the MUTE feature. The party on the telephone line cannot hear you, but you can hear them.

1.Press the menu ok/mute button. The handset display shows MUTE ON.

2.Press the menu ok/mute button to cancel and return to your phone conversation.

Receiver Volume Control

When the handset is ON (in talk mode) you may adjust the receiver volume by pressing the vol/CID ( 6 or 5) button. There are four volume levels to choose from. When the maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.

Intercom Operation (applicable only with additional handsets)

The intercom feature allows you to have a conversation with another registered handset without tying up the telephone line, allowing you to still receive incoming calls.

Making an Intercom Call

1.Make sure the handset is OFF (not in talk mode).

2.Press the del/conf/intercom button on the handset.

3.Use the touch-tone pad to select the handset you want to page.

NOTE: To cancel page, press the del/conf/intercom button again or the end button on the sending handset.

4.Wait for the person at the receiving handset to press the del/conf/intercom button.

NOTE: If the receiving handset does not answer within two minutes, the intercom call is automatically canceled. The originating handset displays

NO ANSWER.

5.When finished, press the end button or del/conf/intercom button on either handset to deactivate the intercom.

NOTE: The system is expandable up to 6 handsets (by purchase of optional Model 28106 handset with recharge cradle). When 6 handsets are registered, the system can handle 2 separate intercom operations at once, for example, 1st handset intercoms with 2nd handset while 3rd handset intercoms with 4th handset.

27