2.Enter the security code during the outgoing announcement or after you hear the tone.
NOTE: The default security code is 123
3.Follow the voice menu to use the answering system’s remote functions.
The remote feature lets you perform the following functions:
To | Press this button |
Review message | 1 |
Play back messages | |
Stop message playback | |
Erase message | 0 (during message playback) |
Skip message | 3 |
Turn off/on answerer | 4 |
Review voice menu options | 7 |
Memory Full
When answering system memory is full, the system answers after 10 rings, beeps and waits for you to enter the
You should erase some messages so the answering system can record new messages.
NOTE: The unit also answers after the 10th ring if it is turned off. To access the answering system, enter your
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved Lithium battery model
1.Make sure the telephone is OFF (not in TALK mode) before you replace battery.
2.Remove the battery compartment door.
3.Disconnect the cord attached to the battery pack and remove the battery pack from the handset.
4.Insert the new battery pack and connect the cord to the jack inside the battery compartment.
38