Getting Started and Using Masks
To install the Standard Masks
To install the Standard Masks
Use the copy of the Mask Test disk to install standard masks onto the Infiniium hard drive. The Mask Test disk contains many of the available standard masks that you may need to use during mask testing.
1Insert the copy of the Mask Test disk in the floppy drive.
2From the oscilloscope main menu, select Analyze, then Mask Test.
3In the Mask Test Setup dialog box, select the Enable Mask Test control.
4 In the Mask Test Setup dialog box, click the Load Mask... button.
The Load Mask dialog box will resemble:
This selects the disk where the masks are installed.
This selects the directory where the masks are installed.
5Click the Install Masks from A: button.