Agilent Technologies Option 100, E2625A Overview of the Mask Test Setup dialog box, Is enabled

Page 10

Introduction to Option 100 and E2625A Telecommunications Mask Template Kit

Overview of the Mask Test Setup dialog box

Overview of the Mask Test Setup dialog box

You will use the Mask Test Setup dialog box shown here to load and use masks with the Infiniium Oscilloscope. Standard masks are shown in Chapter 3. How to load and use a mask is described in Chapter 2.

Mask Test Setup

Dialog Box

A Mask Test tab will appear when the Mask Test

Checkmark to enable the Mask Test.

Click to load a Mask.

Click to align or clear a Mask.

Conditionallyrun the Mask Test and stop on the first failure.

is enabled.

Check options to invert a mask, use the file setup when aligning a mask, or enable averaging to reduce noise.

See the Infiniium help system to

Click to start use Scaling and Automask. and stop the

Mask Test.

1-6

Image 10
Contents User’s Guide Getting Started and Using Masks This BookContents Contents-2 Page Adding Option 100 to an existing Infiniium Oscilloscope Supplied items Recommended accessoriesWhat not to do Oscilloscope models Channels Bandwidth Sample RateTo access the Mask Test Setup dialog box Overview of the Mask Test Setup dialog box Is enabledGetting Started and Using Masks Getting Started and Using Masks Introduction to Mask TestingHow Infiniium does Mask Testing Make a copy of the Mask Test diskTo install the Standard Masks Load Mask dialog box will resembleTo calibrate the oscilloscope Cal Memory ProtectTo choose a proper probe for Mask Testing Calibrating the probe adapterTo get your waveform on the oscilloscope display To enable the Mask Test To load a Mask Locate the Use File Setup When Aligning option To align a Mask to the waveformStarts mask test in the Mask Test Setup dialog box To start and stop the Mask TestTo understand the Mask Test tab description area To run the Mask Test conditionally To stop the Mask Test on the first failure Analyzing a failureStandard Masks Standard Masks Pre-Compliance Sonet Masks ITU G.703 International Standard Masks 2MbITU75.msk 6312kbITU110DS2.msk 6312kbITU75DS2.msk 8MbITU.msk 34MbITU.msk 44736kbITUDS3.msk 140MbITU0.msk 140MbITU1.msk 140MbITU1INV.msk 155MbITU0.msk 155MbITU1.msk 155MbITU1INV.msk Ansi T1.102 North American Standard Masks DS1CANSI.msk DS2ANSI.msk DS3ANSI.msk DS4NAANSI.msk DS4NAANSIMAX.msk STS1ANSIEYE.msk STS1ANSIPULSE.msk STS3ANSI.msk STS3ANSIMAX.msk FCC Part 68.308 Options A, B, and C Masks FCC68OPTC.msk Pre-Compliance Sonet Masks OC12SONET.msk Ieee 802.3 Masks 100BASETXSTP 100BASETXUTP Safety Document Warranty