Getting Started and Using Masks
To start and stop the Mask Test
To start and stop the Mask Test
1Access the Mask Test Setup dialog box and make sure the mask test is enabled.
2At the bottom of the Mask Test Setup dialog box, locate the start and stop mask test buttons.
•The green triangle starts the mask test.
•The red square stops the mask test.
Starts mask test in the Mask Test Setup dialog box.
Stops mask test in the Mask Test Setup dialog box.
Starts/stops mask test from the Mask Test tab.
3Click the green triangle to start the mask test.
When you start a mask test, Infiniium also starts the acquisition system.