Getting Started and Using Masks
To understand the Mask Test tab description area
To understand the Mask Test tab description area
After you have enabled the mask test in the Mask Test Setup dialog box, you will see a Mask Test tab on the lower left of the oscilloscope screen, beneath the waveform viewing area. The description area below the Mask Test tab shows:
•Mask title
•Amplitude specifics (for ANSI T1.102 North American Standard Masks only)
•Total number of waveforms in the duration of the mask test
•Number of failed waveforms in the mask test
•Regions in the mask
•Waveform violations
Mask Test tab
Description area
When any of the ANSI T1.102 North American Standard Masks are loaded, the Mask Test tab description area will show minimum and maximum amplitude values. These values are the result of testing for specifics of the standard, and indicate the upper or lower limit that the standard allows.