Talkswitch CT.TS005.002501.UK manual Install the Talkswitch Software

Page 4

STEP 1 — INSTALL THE TALKSWITCH SOFTWARE

1.Ensure that you have Administrator privileges on your Windows XP or 2000 system.

2.Turn your computer on, and insert the CD into the CD-ROM drive.

3.The Install main window will appear within 20 seconds. Click INSTALL and follow the instructions.

If the installation program does not automatically start (for example, if Autorun is disabled on your PC):

1.From the desktop, double-click the My Computer icon.

2.Double-click on the CD drive labeled TalkSwitch.

3.Double-click on startscreen.exe located in the start folder.

4.Click Install and follow the instructions.

H T T P : / / G L O B A L . T A L K S W I T C H . C O M

Image 4

Contents Start Guide Introduction Check package contents Check your premises telephone wiringBefore YOU Begin Ensure that you have the minimum system requirementsInstall the Talkswitch Software Power up TalkSwitch Connect Talkswitch to Your PC or NetworkConnection Options Open the Talkswitch Configuration Software Localization SettingConfigure AN Automated Attendant Set up an Auto AttendantConfigure Incoming Telephone Lines Set Auto Attendant to answer all incoming callsSet certain extensions to ring or direct calls to voicemail OptionConnect Telephones and Peripherals Save Settings to TalkswitchConnect incoming external telephone lines Connect an audio source optional Connect telephones and fax machines to TalkSwitchConnect to a Public Address PA System optional Set up and record voicemail Auto Attendant and Voicemail GreetingsWhat should an Auto Attendant say? To load a pre-recorded Auto Attendant greetingConnect TalkSwitch units Networking Talkswitch on a LANPower up all TalkSwitch units Changing TalkSwitch unit ID numbers Configuring the Networked UnitsSetup Complete Configuring TalkSwitch 48 remotelyCongratulations What nextCT.TS005.002501.UK April