Talkswitch CT.TS005.002501.UK Open the Talkswitch Configuration Software, Localization Setting

STEP 3 — OPEN THE TALKSWITCH CONFIGURATION SOFTWARE

Double-click the TalkSwitch icon on your Desktop (this icon was created during the software installation), or from the Start menu, select Programs, select the TalkSwitch 3.24 folder, and click TalkSwitch Configuration 3.24.

TalkSwitch Software will now attempt to detect your unit, displaying progress on a “Detecting TalkSwitch Units” window.

When software succeeds in detecting your TalkSwitch, a progress bar appears on the screen showing the connection to TalkSwitch in progress. When the bar disappears, the TalkSwitch System Configuration window

will appear.

If software was unable to detect your TalkSwitch automatically, a dialog box opens requesting you to select the connection type.

LAN connection:

From the Connection Type menu, select Ethernet and click Connect.

USB connection:

From the Connection Type menu, select USB and click Connect.

Once connection has been established, the

TalkSwitch System Configuration window will appear.

NOTE: If you encounter difficulties opening the TalkSwitch configuration software, check that all your wires and plugs are securely connected.

Localization Setting

Before configuring your system, you will need to select the location where the system is currently installed:

1.In the TalkSwitch System Configuration window, select System Information and then Administration from the menu at the left of the window.

2.In the Localization Settings section, click the dropdown list box to select where the system is currently installed. The default International location is UK.

Users in Ireland should set the localization setting to Ireland.

H T T P : / / G L O B A L . T A L K S W I T C H . C O M 5