20.5.99 | kap05.fm5 | Profiset 70isdn, GB: |
Programming telephone settings
Activating/deactivating the individual meter
>
Service?
If the individual meter is activated, the accrued charges are indicated for approx. 3.5 seconds in the telephone dis- play following each call you make which is liable for charg- es.
? > | 3=local functions? | ? > | 1=charges? | ? |
|
|
|
|
|
o and ?
>
<>
With password protection (➔ page 16): enter the pass- word.
1=charge meter? | ? |
|
|
The upper display line indicates whether the individual meter is switched on or off.
Select "switch over?".
?Save the setting. If the individual meter was previously deactivated, it is now switched on. If it was activated, it is now switched off.
Activating/deactivating the summation meter for charges
If the summation meter is switched on, the sum of all charges accrued thus far is indicated for approx. 3.5 sec- onds in the display following each toll call made.
>
Service?
? >
3=local functions?
? >
1=charges?
?
o and ?
>
<>
With password protection (➔ page 16): enter the pass- word.
2=summation meter? | ? |
|
|
The upper display line indicates whether the summation meter is switched on or off.
Select "switch over?".
?Save the setting. If the summation meter was previously deactivated, it is now switched on. If it was activated, it is now switched off.
There may be differences between the device’s meter and the individual meter of the switching centre. The individual meter of the network op- erator is definitive for the telephone bill.
23