BT Freestyle 250 – Issue 02 Ed 1 – 02.01.07 – 7971
42 Base settings
4.Enter the existing PIN code using the keypad and press Menu . New PIN is displayed.
5.Enter a new 4 digit PIN code using the keypad and press Menu . Repeat PIN is displayed.
6.
7. Press and hold Clr to return to standby.
Dial mode
Tone is the default setting for the UK. You should only have to change this if connected to a switchboard that requires Pulse dialling.
Your BT Freestyle 250 is
1.Press Menu to open the main menu.
2.Press or until the display shows Setup base and press Menu .
3.Press or until the display shows Dial mode and press Menu to select.
4.Press or to display either DTMF or Pulse and press Menu . You hear a confirmation tone and Saved is displayed.
5. Press and hold Clr to return to standby.
If you experience any problems, please call the Helpline on 0870 240 3962 or email bt.helpdesk@vtecheurope.com