Diverse 4000 Classic ~10th Edition ~ 19th September ’01 ~ 4167
3Registering and charging the handset
The display is protected by a plastic film. You can remove this protective film from the display.
Insert the batteries
Insert the two batteries supplied, as indicated on the label inside the battery compartment and slide the battery compartment cover shut.
The battery cover may be found in the packaging with the batteries.
WARNING
Under no circumstances should non- rechargeable batteries be used. Only use the approved batteries. Using unapproved batteries will invalidate your guarantee and may damage the telephone.
To register your handset, place it in the main Diverse 4000 base station with the display facing upward.
After approx. one minute, the handset’s internal number is displayed (eg: INT2). Successful registration is signalled by a confirmation tone.
Replace the newly registered handset into the Classic Charger Unit and leave to charge for approximately 16 hours. The charging status icon flashes on the handset to indicate that the batteries are being charged.
When the handset is registered the
display will show: 
SETTINGUP
If the icons on the display flash
continuously…
It means that the handset is not registered with the base station.
Ensure you have correctly carried out step 3 above.
All additional handsets you purchase will need to be individually registered with the base station before they will work.
11